MP Series
Low Cost Quartz Crystal
PACKAGING INFORMATION [Reference Only]
MP Radial Taping (Ammopak)
DIMENSIONS IN MILLIMETERS
Ø4.00
32.50 Max
18.50
18.00
0.90 Max
3.81
12.70
MP-SMMC Tape and Reel
DIMENSIONS IN MILLIMETERS
36
2.0
Ø13
4.0
16.0
Ø1.50
1.75
5.8
6.5
120°
24
32
18.4
20.1
Ø330
Ø60
11.1
11.7
Ø100
DIRECTION OF FEED
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle:
Mechanical Shock:
Sinusoidal Vibration:
400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1 minute transfer time
between temperatures.
1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular
planes (18 total shocks).
0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually
perpendicular planes (9 times total).
Gross Leak:
Fine Leak:
No leak shall appear while immersed in an FC40 or equivalent liquid at +125°C for 20 seconds.
Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.
Resistance to Solder Heat:
High Temperature Operating Bias:
Frequency Aging:
Product must survive 3 reflows of +250°C maximum, 10 seconds maximum.
2,000 hours at +125°C, disregarding frequency shift.
1,000 hours at +85°C, maximum ±5 ppm shift.
500M Ohms @ 100VDC ±15VDC.
Insulation Resistance:
Moisture Sensitivity Level:
Level 1 per JEDEC J-STD-020.
Document No. 008-0308-0
Page 6 - 6
Rev. H