Freescale Semiconductor, Inc.
TERMINAL DEFINITIONS (continued)
A functional description of each terminal can be found in the System/Application Information section beginning on page 14.
Die
Terminal
Terminal Name
Formal Name
Definition
MCU
44
47
VSSA
VDDA
ADC Supply
Terminals
These terminals are the power supply terminals for the analog-to-digital
converter.
MCU
MCU
45
46
EVSS
EVDD
MCU Power Supply
Terminals
These terminals are the ground and power supply terminals, respectively.
The MCU operates from a single power supply.
49
50
52
53
54
PTA4/KBD4
PTA3/KBD3
PTA2/KBD2
PTA1/KBD1
PTA0/KBD0
Port A I/Os
These terminals are special-function, bidirectional I/O port terminals that
are shared with other functional modules in the MCU.
MCU
51
15
FLSVPP
FGEN
Test Terminal
For test purposes only. Do not connect in the application.
Analog
Current Limitation
Frequency Input
This is the input terminal for the half-bridge current limitation PWM
frequency.
Analog
16
BEMF
Back Electromagnetic This terminal gives the user information about back electromagnetic force
Force Output
(BEMF).
Analog
Analog
17
18
Internal Reset
RST_A
IRQ_A
This terminal is the bidirectional reset terminal of the analog die.
Internal Interrupt
Output
This terminal is the interrupt output terminal of the analog die indicating
errors or wake-up events.
Analog
Analog
Analog
19
20
Slave Select
LIN Bus
This terminal is the SPI slave select terminal for the analog chip.
This terminal represents the single-wire bus transmitter and receiver.
SS
LIN
23
26
29
32
HB1
HB2
HB3
HB4
Half-Bridge Outputs
This device includes power MOSFETs configured as four half-bridge
driver outputs. These outputs may be configured for step motor drivers,
DC motor drivers, or as high-side and low-side switches.
Analog
24
27
31
VSUP1
VSUP2
VSUP3
Power Supply
Terminals
These terminals are device power supply terminals.
These terminals are device power ground connections.
Analog
Analog
25
30
GND1
GND2
Power Ground
Terminals
34
HVDD
Switchable VDD
Output
This terminal is a switchable VDD output for driving resistive loads
requiring a regulated 5.0 V supply; e.g., 3-terminal Hall-effect sensors.
Analog
Analog
38
40
VDD
VSS
Voltage Regulator
Output
The +5.0 V voltage regulator output terminal is intended to supply the
embedded microcontroller.
Voltage Regulator
Ground
Ground terminal for the connection of all non-power ground connections
(microcontroller and sensors).
Analog
–
41
RXD
LIN Transceiver
Output
This terminal is the output of LIN transceiver.
EP
Exposed Pad
Exposed Pad
The exposed pad terminal on the bottom side of the package conducts
heat from the chip to the PCB board.
908E626
4
MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA
For More Information On This Product,
Go to: www.freescale.com