FEDL5243_001-04
1. December, 2020
ML5243-001
5-Series Cell Li-ion Rechargeable Battery Protection IC
■ General Description
The ML5243 is a protection IC for the 5-cell Li-ion rechargeable battery pack. It detects individual cell
overvoltage/undervoltage and the pack overcurrent/over-temperature, and its output signal indicates
charge/discharge enable. And it has open-wire detection function of battery connection wire.
■ Features
• 3 to 5 cell high-precision overvoltage and undervoltage detection function
Voltage detecting function for individual cells
Overvoltage detection threshold
2nd overvoltage detection threshold
Undervoltage detection threshold
4.225 V, Detection accuracy: ±25 mV (0 to 60°C)
4.325V,
2.0 V,
Detection accuracy: ±35 mV (0 to 60°C)
Detection accuracy: ±50 mV (0 to 60°C)
• Overcurrent detection function
Discharge overcurrent detection threshold
Charge overcurrent detection threshold
Short circuit detection threshold
70 mV,
-30 mV,
Detection accuracy: ±15 mV (0 to 60°C)
Detection accuracy: ±15 mV (0 to 60°C)
300 mV, Detection accuracy: ±20 mV (0 to 60°C)
• Temperature detection function
: With external NTC (10 k, B=3435) and 4.7 k resistor
Discharge inhibition temperature: detection 70 °C or higher, release 65 °C or lower
Charge inhibition temperature : detection -5 °C or lower/50°C or higher, release 0 °C or higher/45°C
or lower
• Detection delay timer built-in
Overvoltage/undervoltage detection delay time : 2sec
2nd overvoltage detection delay time
Open-wire detection delay time
: 8sec
: 3.6sec
TEST MODE reduces each detection delay time as 0.1sec by controlling the TEST pin input.
• Three type of charge/discharge enable signal output/
Selected from CMOS / Nch open drain / Pch open drain (high voltage tolerant output)
• Detection voltages and detection delay times are modified by product code.
• Low current consumption (-40 to 85°C)
Normal operation state : 4.5 µA (typ.), 10 µA (max)
Power-down state
: 0.1 µA (typ.), 1.0 µA (max)
• Supply voltage
: +5 V to +25 V
• Operating temperature
• Package
: -40°C to +85°C
: 20-pin TSSOP
Note) This product is not intended for automotive use and for any equipment, device, or system that requires a
specific quality or high level of reliability (e.g., medical equipment, transportation equipment, aerospace
machinery, nuclear-reactor controller, fuel-controller, various safety devices). If you are not sure whether
your application corresponds to such special purposes, please contact your local ROHM sales
representative in advance.
1/28