Sharma Film Capacitors
Ordering/Part Numbering
Example below indicates: MKT100 Series, 0.1µF, 5% Tol., 100 Volts, Bulk.
RH
(EXAMPLE)
Series
M
K
T
1
0
0
1
0
4
J
1
0
1
Enter Series Code: (Up to 6 Digits)
RoHS
Compliant
MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02,
MKTD03, MKTR, MKTO.
Capacitance
Enter EIA Capacitance Code: (3 Digits)
First Two Digits Represent Significant Figures of Capacitance in Picofarads.
Third Digit Indicates Number of Zeros
Example: 1000pF = 102
0.01uF = 103
Tolerance
Enter Capacitance Tolerance Code: (1 Digit)
Tolerance
Code
SPCL ± 1% ± 2% ± 3% ± 5% ± 6% ± 10% ± 20%
A
F
G
L
J
H
K
M
Rated Voltage
Enter Voltage Code: (3 Digits)
First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating.
Third Digit Indicates Number of Zeros
Example: 50V DC = 500
250V DC = 251
Product Packaging Code
Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style.
For other packaging styles, Enter packaging code listed below. (1 Digit)
Packaging
Packaging
Style
Code
T
A
Tape/Reel
Ammo
( no code)
Bulk
Part Marking
2.2J250
BOX TYPE
DIPPED TYPE
The Capacitance value is marked in µF along
with the Tolerance code and the DC Voltage
Figures on the side of the capacitors. The
capacitance is also marked in Capacitance
code with the first two digits representing the
significant digits followed by one digit
representing the number of zeros. The SAHA
The Capacitance value is marked in µF together
with the Tolerance code and the DC Voltage
Figures on the top surface of the capacitors. The
capacitance is also marked in Nano Farads with "n"
representing the decimal point in the capacitance
value. The SAHA logo and series codes, MKT100,
MKP 100, KP300 etc., or their former series
2.2K250
MKT 100
logo may be replaced with
or no brand marking depending on the limitation of space.
marking, "SH", “S”
designations, are marked on the side. MKT100 series is supplied in
certain cases, without series code marking. SAHA logo may be
replaced with
marking, "SH" or “S” depending upon the
limitations of space.
OTHER TYPES
All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the
capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also
indicated with a dot or ring.