MK1726A
Low EMI Clock Generator
In the equation, C is the crystal load capacitance. For
L
example, a crystal with a 16 pF load capacitance uses
two 20 pF [(16-6) x 2] capacitors.
Modulation Rate
Spread Spectrum Profile
The MK1726-01A/-02A/-04A device’s low EMI clock
generator uses an optimized frequency slew rate
algorithm to facilitate down stream tracking of zero
delay buffers and other PLL devices.
T i m e
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the MK1726A devices. These
ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional
operation of the device, at these or any other conditions, above those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods
can affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Rating
Supply Voltage, VDD
All Inputs and Outputs
7 V
-0.5 V to VDD+0.5 V
0 to +85°C
-65 to +150°C
175°C
Ambient Operating Temperature
Storage Temperature
Junction Temperature
Soldering Temperature
260°C
Recommended Operation Conditions
Parameter
Min.
Typ.
Max.
+70
Units
°C
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
0
+3.0
3.63
V
MDS 1726A B
4
Revision 101703
Integrated Circuit Systems, Inc. z 525 Race Street, San Jose, CA 95126 z tel (408) 297-1201 z www.icst.com