MIC2211
Micrel, Inc.
MIC2211
Dual µCap LDO in 3mm × 3mm MLF™
General Description
Features
The MIC2211 is a dual µCap low dropout regulator. The first
regulator is capable of sourcing 150mA, while the second
regulator can source up to 300mA.
• Input voltage range: 2.25V to 5.5V
• Stable with ceramic output capacitor
• 2 LDO outputs:
• Output 1 - 150mA output current
• Output 2 - 300mA output current
• Low dropout voltage of 80mV @ 100mA
• Ultra-low quiescent current of 48µA total (24µA/LDO)
• High output accuracy:
• +1.0% initial accuracy
• +2.0% over temperature
• Thermal shutdown protection
• Current limit protection
• Tiny 10-pin 3mm × 3mm MLF™ package
Idealforbatteryoperatedapplications,theMIC2211offers1%
accuracy, extremely low dropout voltage (80mV @ 100mA),
andextremelylowgroundcurrent(only48µAtotal). Equipped
with TTL logic compatible enable pins, the MIC2211 can be
put into a zero-off-mode current state, drawing no current
when disabled. Separate enable pins allow individual control
of each output voltage.
The MIC2211 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
Applications
• Cellular phones
• Wireless modems
• PDAs
The MIC2211 is available in fixed output voltages in the
10-pin 3mm × 3mm MLF™ leadless package.
Typical Application
MIC2211-xxBML
VIN
VOUT1
VI/O
OFF ON
OFF ON
VCORE
EN1
EN2
CBYP
VOUT2
1
F
1
F
Ceramic
Baseband
Processor
0.01
F
GND
MIC2211 Typical Cell Phone Application
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
October 2005
1
M9999-101805