Datasheet > MHR24FGJ80.000

MHR24FGJ80.000

更新时间： 2024-11-19 19:50:31

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

MHR24FGJ80.000 技术参数

MHR Series HCMOS/TTL

Compatible Oscillators

MHR Series HCMOS/TTL

Compatible Plastic Package

Surface Mount Oscillators

* Consult factory regarding availability of B and C symmetry codes.

Electrical Specifications

NOTE: A capacitor of value 0.01 mF or greater between

Vdd and Ground is recommended.

Pin Connections

Tri-state Control Logic

Pin 1 high or floating: clock signal output.

Pin 1 low: output disabled to high impedance.

Available Stabilities

vs. Temperature

A = Available

N = Not Available

S = Standard

C = Consult Factory

¹Because this product is based on AT-strip technology, not all frequencies in the range stated are available.

Contact the factory for availability of specific frequencies.

²TTL load - See load circuit diagram #1 on page 137. HCMOS load - See load circuit diagram #2 on page 137.

³Symmetry is measured at 1.4 V with TTL load, and at 50% Vdd with HCMOS load.

Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd

with HCMOS load.

See page 136, Figure 2 for suggested solder profile.

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
MHR24FGJ80.0000MHZ	MTRONPTI	获取价格	HCMOS Output Clock Oscillator, 50MHz Min, 80MHz Max, 80MHz Nom, J-LEADED, 4 PIN
MHR24FGJFREQ2	MTRONPTI	获取价格	HCMOS Output Clock Oscillator, 67.001MHz Min, 80MHz Max, J LEADED PACKAGE-4
MHR24FGJ-R	MTRONPTI	获取价格	9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillator
MHR24FGJ-R80.0000MHZ	MTRONPTI	获取价格	Oscillator, 1MHz Min, 80MHz Max, 80MHz Nom, CMOS
MHR24FGJ-RFREQ1	MTRONPTI	获取价格	HCMOS Output Clock Oscillator, 50.001MHz Min, 67MHz Max, ROHS COMPLIANT, J LEADED PACKAGE-
MHR24HSGAL	ADAM-TECH	获取价格	.100 LATCH HEADER .100 X .100 [2.54 X 2.54] CENTERLINE
MHR24HSGAN	ADAM-TECH	获取价格	.100 LATCH HEADER .100 X .100 [2.54 X 2.54] CENTERLINE
MHR24HSGAS	ADAM-TECH	获取价格	.100 LATCH HEADER .100 X .100 [2.54 X 2.54] CENTERLINE
MHR24HSGBL	ADAM-TECH	获取价格	.100 LATCH HEADER .100 X .100 [2.54 X 2.54] CENTERLINE
MHR24HSGBN	ADAM-TECH	获取价格	.100 LATCH HEADER .100 X .100 [2.54 X 2.54] CENTERLINE