MODEL: MDP-TL
Lightning Surge Protectors for
Electronics Equipment M-RESTER
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: Modular jack or M4 screw terminals (torque 0.8
N·m)
LIGHTNING SURGE PROTECTOR
Modular jack cord: 6-pole, 2-core
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
FOR TELECOMMUNICATION LINE USE
Functions & Features
• Designed specifically to protect telecommunication
equipment from lightning surges entering through
telecommunication line network
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
• Easy connection to the protected equipment
with modular jacks
• Connection with a telephone and a modem in
parallel
Weight:
120 g (0.26 lb), standard
• No interruption of transmission signal by unplugging the
protector element
145 g (0.32 lb), with DIN rail mounting adapter
PERFORMANCE
Max. continuous operating voltage (Uc):
Line to line: ±160 V
Lot.NO
Line to earth: ±160 V
MDEIJPAN1430B
Voltage protection level (Up):
• @ 1 kV (100 A)
M•STER
MODEL
Line to line: ±650 V
Line to earth: ±900 V
• @ 2 kV (1 kA)
MODEL: MDP–TL[1]
Line to line: ±550 V
Line to earth: ±900 V
ORDERING INFORMATION
• Code number: MDP-TL[1]
Specify a code from below for [1].
(e.g. MDP-TL/A33/Q)
Response time: ≤ 0.1 μsec.
Leakage current:
Line to line: ≤ 100 μA @ ±160 V DC
Line to earth: ≤ 100 μA @ ±160 V DC
Max. discharge current (Imax):
Modular jack: 500 A (8 / 20 μs)
Screw terminal: 1000 A (8 / 20 μs)
• Specify the specification for option code /Q
(e.g. /C01)
Nominal current (I ): 500 mA
N
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
Internal series resistance: ≤ 0.1 Ω (including return)
Capacitance @ 1 MHz:
Line to line: ≤ 1000 pF
/A33: With adapter (model A-33)
Other Options
Line to earth: ≤ 100 pF
Surge protection: IEC 61643-21 Categories C1, C2
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MDP-TL SPECIFICATIONS
ES-8202 Rev.8 Page 1/3
http://www.m-system.co.jp/