Datasheet > 电源电路 > 电源管理电路> MB3841PF-G-BND

MB3841PF-G-BND

更新时间： 2024-02-01 21:56:36

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

MB3841PF-G-BND 技术参数

生命周期：	Active	包装说明：	SOP,
Reach Compliance Code：	compliant	风险等级：	5.7
可调阈值：	YES	模拟集成电路 - 其他类型：	POWER SUPPLY SUPPORT CIRCUIT
JESD-30 代码：	R-PDSO-G8	长度：	6.35 mm
信道数量：	1	功能数量：	1
端子数量：	8	最高工作温度：	85 °C
最低工作温度：	-20 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	NOT SPECIFIED
认证状态：	Not Qualified	座面最大高度：	2.25 mm
最大供电电压 (Vsup)：	5.5 V	最小供电电压 (Vsup)：
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
温度等级：	OTHER	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	5.3 mm
Base Number Matches：	1

MB3841

■ USAGE PRECAUTION

1. Never use settings exceeding maximum rated conditions.

Exceeding maximum rated conditions may cause permanent damage to the LSI.

Also, it is recommended that recommended operating conditions be observed in normal use.

Exceeding recommended operating conditions may adversely affect LSI reliability.

2. Use this device within recommended operating conditions.

Recommended operating conditions are values within which normal LSI operation is warranted.

Standard electrical characteristics are warranted within the range of recommended operating conditions and

within the listed conditions for each parameter.

3. Printed circuit board ground lines should be set up with consideration for common

impedance.

4. Take appropriate static electricity measures.

• Containers for semiconductor materials should have anti-static protection or be made of conductive material.

• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.

• Work platforms, tools, and instruments should be properly grounded.

• Working personnel should be grounded with resistance of 250 kΩ to 1 mΩ between body and ground.

5. Do not apply negative voltages.

The use of negative voltages below –0.3 V may create parasitic transistors on LSI lines, which can cause

abnormal operation.

■ ORDERING INFORMATION

Part number

MB3841 PF-G-BND

Package

Remarks

8-pin Plastic SOP

(FPT-8P-M01)

下载PDF

型号	品牌	描述	获取价格	数据表
MB3842	FUJITSU	Power Management 2-ch Switch IC	获取价格
MB3842PFV	FUJITSU	Power Management 2-ch Switch IC	获取价格
MB3843	FUJITSU	Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Funct	获取价格
MB3843APFVGBND	FUJITSU	Converter	获取价格
MB3843PFV	FUJITSU	Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Funct	获取价格
MB3843PFV-G-BND	FUJITSU	Battery Charge Controller, Voltage-mode, 0.5A, 500kHz Switching Freq-Max, PDSO16, PLASTIC,	获取价格