MAX98050
Low-Power, High-Performance Audio Codec
BITFIELD
BITS
RES
DESCRIPTION
DECODE
Controls whether or not the device
attempts to automatically recover from an
FLL lock error. If disabled, the device is
placed in the software shutdown state on
FLL lock errors. If enabled, the device
automatically returns to the audio state
once FLL lock is restored.
0x0: FLL lock error recovery is in manual
mode.
0x1: FLL lock error recovery is in automatic
mode.
FLL_ERR_
AUTOREST
ART_EN
2
EN
0x0: Internal DSP sample rate is 96kHz
Selects the sample rate at which the core (for a 48kHz clock base) or 88.2kHz (for a
internal device DSP and digital filter
channels run. The precise rate is based
upon the sample rate (LRCLK rate)
selected for the PCM interface and
playback channel (PCM_PB_SR), and is
44.1kHz clock base).
0x1: Internal DSP sample rate is 192kHz
(for a 48kHz clock base) or 176.4kHz (for a
44.1kHz clock base).
DSP_SR
1:0
EN
0x2: Internal DSP sample rate is 384kHz
a multiple of the same clock base (48kHz (for a 48kHz clock base) or 352.8kHz (for a
or 44.1kHz clock base ratio).
44.1kHz clock base).
0x3: Reserved
Device System Level Enables (0x20FF)
BIT
Field
7
–
–
6
–
–
5
–
–
4
–
–
3
–
–
2
–
–
1
–
–
0
AUDIO_EN
0x0
Reset
Access
Type
Write,
Read, Ext
–
–
–
–
–
–
–
BITFIELD
BITS
RES
DESCRIPTION
DECODE
Global audio enable is used to place the
device into software shutdown, or to allow
the device to exit software shutdown (if all
other conditions are met). In software
shutdown, all internal blocks are disabled
0x0: Device is held in software shutdown.
0x1: Device is not held in software
shutdown.
AUDIO_EN
0
–
2
except for the I C control interface, the
device register contents, and any
currently active fault modes.
Device ID MSB (0x28FD)
BIT
Field
7
6
5
4
3
2
1
0
DEV_ID[15:8]
Reset
0x80
Access
Type
Read Only
BITFIELD
DEV_ID
BITS
RES
DESCRIPTION
7:0
–
Upper two digits of the device identification number.
www.maximintegrated.com
Maxim Integrated | 176