19-6204; Rev 0; 4/12
E V A L U A T I O N K I T A V A I L A B L E
MAX98095
Audio Hub with FlexSoundProcessor
General Description
Benefits and Features
S 102dB DR Stereo DAC (8kHz < f < 96kHz)
The MAX98095 is a full-featured high performance audio
hub with low power consumption and advanced signal
processing, making it ideal for a wide range of portable
applications.
S
S 90dB DR Stereo ADC (8kHz < f < 96kHz)
S
S 4.2mW Headphone Playback Power Consumption
S Stereo Low EMI Class D Amplifiers
3.2W per Channel (4I , PVDD� = 5.0V)
1.2W per Channel (8I , PVDD� = 4.2V)
S Stereo DirectDriveM Headphone Amplifiers
33mW per Channel (32I)
Three differential analog microphone inputs and four 1-bit
digital microphone inputs accept audio from main, acces-
sory, and background microphones. Analog line inputs
accept four single-ended or two differential audio signals.
S Differential Receiver Amplifier
Three digital audio interfaces support I2S/PCM/TDM
audio formats. Three integrated sample rate converters
and highly configurable signal routing enable a wide
range of use cases. The FlexSoundK audio processor
provides low-power advanced signal processing, includ-
ing equalization, dynamic range compression, speaker
protection, microphone noise suppression, acoustic
echo cancellation, and ambient aware outputs.
S 2 Stereo Single-Ended/Mono Differential Line
Inputs
S 3 Differential Microphone Inputs
S FlexSound Audio Processing
Enhanced Speakerphone
Single/Dual Microphone Noise Suppression
Ambient Aware Receiver Output
Acoustic Echo Cancellation
Integrated amplifiers can output signals from three DACs
or any of the analog inputs. Amplifiers include a differen-
tial receiver amplifier, a stereo Class D speaker amplifier,
a stereo Class H headphone amplifier and four single-
ended line outputs.
S Three I2S/PCM/TDM Digital Audio Interfaces
S Asynchronous Digital Mixing and Sample Rate
Conversion
S Extensive Click-and-Pop Reduction Circuitry
S I2C/SPI Control Interface
S 108 WLP Package (6.4mm x 4.7mm, 0.5mm pitch)
The IC is fully specified over the -40NC to +85NC extended
temperature.
FlexSound is a trademark of Maxim Integrated Products, Inc.
Ordering Information appears at end of data sheet.
DirectDrive is a registered trademark of Maxim Integrated
Products, Inc.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX98095.related.
Simplified Block Diagram
2
2
2
2
I S/PCM
1.8V 1.2V
BATTERY I C/SPI
I S/PCM
I S/PCM
DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO
EARPIECE
AMPLIFIER
POWER SUPPLY
CONTROL
INTERFACE
INTERFACE
INTERFACE
MIC
INPUT
OR
OR
CLASS D
AMPLIFIER
FlexSound DSP
ANALOG
DIGITAL
CLASS D
AMPLIFIER
•
•
•
•
•
•
•
•
5-BAND PARAMETRIC EQ
COMPRESSOR /EXPANDER
MONO
DAC
MIC
INPUT
ASYNCHRONOUS DIGITAL MIXING
SAMPLE RATE CONVERSION
MICROPHONE NOISE SUPPRESSION
ACOUSTIC ECHO CANCELLATION
SPEAKER PROTECTION
STEREO
ADC
CHARGE
PUMP
ANALOG
DIGITAL
STEREO
ADC
MIC
INPUT
CLASS H
AMPLIFIER
AMBIENT AWARE OUTPUTS
ANALOG
JACK
DETECTION
LINE
LINE
INPUT
OUTPUT
MAX98095
����������������������������������������������������������������� Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.