19-2637; Rev 1; 4/03
µP Supervisors with Separate V Reset and
CC
Manual Reset Outputs
General Description
Features
o Precision Factory-Set Reset Thresholds From
The MAX6453–MAX6456 are low-power, dual-voltage
µP supervisors featuring separate V
reset and manu-
CC
1.6V to 4.6V
al reset outputs. The dual outputs support both soft-
system reset (interrupt) and hard-system reset (reboot)
functions. The reset output asserts when any of the
monitored voltages falls below its specified threshold
and remains asserted for the reset timeout (140ms min)
after all voltages exceed their respective reset thresh-
olds. All devices are offered with nine factory-fixed
reset thresholds for monitoring primary system voltages
o Adjustable Threshold to Monitor Voltages Down
to 0.63V
o Manual Reset Input with Extended 3.36s Setup
Period
o Immune to Short Voltage Transients
o Low 6µA Supply Current
(V ) from 1.8V to 5V and an adjustable reset input for
CC
monitoring a secondary system voltage down to 0.63V.
o Guaranteed Valid Reset Down to V
= 1.0V
CC
Each device has a manual reset input, a V
reset out-
CC
o Active-Low RESET (Push-Pull or Open-Drain)
put, and a manual reset output. The MAX6453/
MAX6454 manual reset output asserts when the manual
reset input is low. It remains asserted for the manual
reset timeout period (140ms min) after the manual reset
input transitions high. The MAX6453/MAX6354 manual
reset input controls only the manual reset output and
Outputs
o 140ms (min) Reset Timeout Period
o Small SOT Package
Ordering Information
does not affect the V
reset output.
CC
The manual reset input of the MAX6455/MAX6456 con-
trols both the manual reset and V reset outputs. When
PART
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
6 SOT23-6
6 SOT23-6
6 SOT23-6
6 SOT23-6
CC
MAX6453UT_ _S-T
MAX6454UT_ _S-T
MAX6455UT_ _S-T
MAX6456UT_ _S-T
the manual reset input is low for less than 3.3s (typ), only
the manual reset output asserts and remains asserted for
the manual reset timeout period (140ms min) after the
manual reset input transitions high. If the manual reset
input is low for at least 3.3s (typ), the reset output also
asserts and remains asserted for the reset timeout peri-
od (140ms min) after the manual reset input transitions
high. This enhanced feature allows the implementation of
a soft/hard-system reset combination.
Note: The “_” is a placeholder for the threshold voltage level of
the devices. A desired threshold level is set by the part num-
ber suffix found in Table 1. All devices are available in tape-
and-reel only. There is a 2500-piece minimum order increment
for standard versions (Table 2). Sample stock is typically held
on standard versions only. Nonstandard versions require a
minimum order increment of 10,000 pieces. Contact factory for
availability.
The MAX6453/MAX6455 have active-low push-pull
reset and manual reset outputs, and the MAX6454/
MAX6456 have active-low open-drain reset and manual
reset outputs. All devices are available in small SOT23-
6 packages and are fully specified over the extended
temperature range (-40°C to +85°C).
Selector Guide appears at end of data sheet.
Pin Configurations
TOP VIEW
Applications
Set-Top Boxes
Consumer Electronics
DVD Players
RESET
GND
1
2
3
6
5
4
MR
RESET
GND
1
2
3
6
5
4
MR
Modems
MAX6453
MAX6454
MAX6455
MAX6456
RSTIN
RSTIN
MP3 Players
Industrial Equipment
Automotive
MROUT
V
MROUT
V
CC
CC
Medical Devices
SOT23-6
SOT23-6
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
5秒后页面跳转
深入解析CS8416引脚说明、参数、技术特点
TPA3116D2功放芯片参数详解、引脚说明
移位寄存器74HC165引脚说明、驱动程序示例解读
深入解析AD9833：DDS频率合成器的卓越性能与广泛应用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
