Click here for production status of specific part numbers.
MAX22530–MAX22532
Field-Side Self-Powered,
4-Channel, 12-bit, Isolated ADC
General Description
Benefits and Features
The MAX22530–MAX22532 are galvanically isolated, 4-
channel, multiplexed, 12-bit, analog-to-digital converters
(ADC) in the MAXSafe™ family product line. An
integrated, isolated, DC-DC converter powers all field-
side circuitry, and this allows field-side diagnostics even
when no input signal is present.
•
Enable
Analog/Binary Inputs
• Withstands 3.5kV
Robust
Detection
of
Multichannel
Isolation for 60s (V
) for
ISO
RMS
the SSOP Package
• Withstands 5kV
Isolation for 60s (V
) for
ISO
RMS
the Wide SOIC Package
• 5.5mm of Creepage and Clearance for 20-pin or
28-pin SSOP Package
• 8mm of Creepage and Clearance for 16-pin Wide
SOIC Package
The MAX22530–MAX22532 family continually digitizes
the input voltage on the field-side of an isolation barrier
and transmits the data across the isolation barrier to the
logic-side of the devices where the magnitude of the
input voltage is compared to programmable thresholds.
The 12-bit ADC core has a sample rate of 20ksps (typ)
per-channel. ADC data is available through the SPI
interface either directly or filtered. Filtering averages the
most recent 4 readings depending on the setting.
• Group II CTI Package Material
•
Reduces BOM and Board Space Through High
Integration
• Field-Side Self-Powered with Integrated DC-DC
Supply
• 12-bit, 20ksps Per-Channel ADC
• Programmable Threshold Comparators for each
Channel
• Isolation for both Data and DC-DC Supply
• Integrated 1.8V Reference
Each input has a comparator with programmable high
and low thresholds, and an interrupt is asserted when
any input crosses its programmed level based on the
mode setting. The comparator output pin (COUT_) is
high when the input voltage is above the upper threshold
and low when it is below the lower threshold in digital
input mode. Response time of the comparator to an input
change is less than 75ms (typ) with filtering disabled.
With filtering enabled, the comparator uses the moving
average of the last 4 ADC readings.
•
•
Increase System “Up Time” and Simplifies System
Design & Maintenance
• Field-Side ADC Functionality Diagnostics
• Field-Side Continuous Power Monitoring
• Communication System Self-Diagnostics
The MAX22530 in a 16-pin wide SOIC package provides
Flexible Control and Interface
• Programmable Upper and Lower Input Threshold
Enable Programmable Hysteresis
• Comparator Output (COUT_) Pins for Fastest
Response
8mm of creepage and clearance, and 5kV
isolation.
RMS
The MAX22531 in a 20-pin SSOP package and the
MAX22532 in a 28-pin SSOP package, both provide
5.5mm of creepage and clearance, and 3.5kV
RMS
• SPI Interface with CRC Option
isolation. All package material has
a minimum
• Precision Internal Reference ±1% (typ)
• -40°C to +125°C Operating Temperature Range
comparative tracking index (CTI) of 400, which gives it a
group II rating in creepage tables.
All devices are rated for operation at ambient
temperatures between -40°C to +125°C.
Safety Regulatory Approvals (Pending)
•
•
UL According to UL1577
cUL According to CSA Bulletin 5A
Applications
•
•
•
•
•
High-Voltage Binary Input
Substation Automation
Distribution Automation
Process Automation
Motion Control
Ordering Information appears at the end of the data
sheet.
19-100989; Rev 0; 3/21