19-1524; Rev 2; 11/99
MAX2264/MAX2265/MAX2266 Evaluation Kits
General Description
Features
ꢀ Easy Evaluation of MAX2264/MAX2265/MAX2266
ꢀ +2.7V to +5V Single-Supply Operation
The MAX2264/MAX2265/MAX2266 evaluation kits (EV
kits) simplify evaluation of the MAX2264/MAX2265/
MAX2266 power amplifiers (PAs), which are designed for
operation in IS-98-based CDMA, IS-136-based TDMA,
and PDC cellular phones operating in the 900MHz range.
The kits enable testing of the devices’ RF performance
and require no additional support circuitry. The EV kits’
signal inputs and outputs use SMA connectors to facili-
tate the connection of RF test equipment.
ꢀ RF Input/Output Matched for 824MHz to 849MHz
Operation
ꢀ All Matching Components Included
Ordering Information
Each kit is assembled with either the MAX2264, MAX2265
or MAX2266 and incorporates input and output matching
components optimized for the 824MHz to 849MHz RF fre-
quency band. These EV kits are capable of operating at
RF frequencies from 750MHz to 1000MHz with the appro-
priate matching components.
PART
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
IC PACKAGE
16 TSSOP-EP*
16 TSSOP-EP*
16 TSSOP-EP*
MAX2264EVKIT
MAX2265EVKIT
MAX2266EVKIT
*Exposed Paddle
MAX2264 EV Kit Component List
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
470pF 5ꢀ ceramic capacitor (0603)
Murata GRM39COHG471J50
6.2pF 0.25pF ceramic capacitor (0603)
Murata GRM39COG6R2C50
C26
1
2
2
2
1
C1
1
GND, V
CC
Test points
C2, C4, C6,
C7, C9,
C14, C17
100pF 5ꢀ ceramic capacitors (0402)
Murata GRM36COG101J50 or
Taiyo Yuden UMK105CH101JW
7
SMA connectors (PC edge mount)
EF Johnson 142-0701-801
IN, OUT
JU1, JU2
L1
0.01µF 5ꢀ ceramic capacitors (0402)
Murata GRM36X7R103J16 or
Taiyo Yuden EMK105B103KW
3-pin headers
C3, C5, C8,
C13, C16
5
1
3.9nH 0.3nH inductor (0603)
Murata LQG11A3N9S00
5.1pF 0.1pF porcelain capacitor
ATC 100A5R1BW150X
5.6nH 2ꢀ inductor
Coilcraft 1606-6G
C10
C11
L2
L3
L4
L5
1
1
1
1
10pF 0.1pF porcelain capacitor
ATC 100A100FW150X
Mounted with top side aligned six tick
marks from the zero tick mark (ruler loc-
ated to the right of C11; see Figure 3)
12nH 5ꢀ inductor (0603)
Murata LQG11A12NJ00
1
39nH 5ꢀ inductor (0603)
Murata LQG11A39NJ00
1.2nH 0.3nH inductor (0603)
Murata LQG11A1N2S00
4.7pF 0.1pF ceramic capacitor (0402)
Murata GRM39COG4R7B50V
C12
C15
C18
1
0
1
Q1
R1, R3
R2
1
2
1
1
1
1
3
1
2
1
1
1
0Ω resistor (0805)
Not installed
51kΩ 5ꢀ resistors (0603)
30.1kΩ 1ꢀ resistor (0603)
7.5kΩ 1ꢀ resistor (0603)
24.3kΩ 1ꢀ resistor (0603)
33.2kΩ 1ꢀ resistor (0603)
0Ω resistors (0603)
220pF 5ꢀ ceramic capacitor (0603)
Murata GRM39COG221J050
R4
10µF 20ꢀ, 16V tantalum capacitor
AVX TAJB106M016
C19
C20
C21
1
1
1
R5
R7
0.01µF 5ꢀ ceramic capacitor (0603)
Murata GRM39X7R103J50
R8, R9, R10
U1
MAX2264EUE (16-pin TSSOP-EP)
Shunts (JU1, JU2)
100pF 5ꢀ ceramic capacitor (0603)
Murata GRM39COG101J50
None
None
None
None
0.1µF 10ꢀ ceramic capacitors (0603)
Murata GRM39X7R104K50V or
Taiyo Yuden EMK107BJ104KA
MAX226X PC board
C22–C25
4
MAX2264/5/6 data sheet
MAX2264/5/6 EV kits data sheet
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.