Click here to ask an associate for production status of specific part numbers.
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-
Boost Converters with Integrated H-Bridge
Architecture
MAX20039/MAX20040
General Description
Benefits and Features
The MAX20039/MAX20040 ICs are a small, synchronous
buck-boost converter family with integrated high-side and
low-side switches. The MAX20040 is designed to deliver
up to 1.2A with input voltages from 2V to 36V while using
only 52µA quiescent current at no load. The ICs provide
an accurate output voltage of ±2%. Voltage quality can be
monitored by observing the PGOOD signal.
● Meets Stringent Automotive Quality and Reliability
Requirements
• 2V to 36V Operating V Allows Operation in Cold-
IN
Crank Conditions
• Tolerates Input Transients Up to 40V
• EN Pin Compatible from 3.3V to 40V
• 0.6A (max) Output Current (MAX20039)
• 1.2A (max) Output Current (MAX20040)
• -40°C to +125°C Automotive Temperature Range
• AEC-Q100
• Increased Efficiency with Reduced BOM Cost and
Board Space
• Integrated FETs H-Bridge Architecture
• Fixed Output Voltages
The MAX20039/MAX20040 offer a fixed output voltage of
5V and a programmable range of 4.0V to 15V. See the
Ordering Information table for more details. Frequency is
adjustable from 220kHz to 2.2MHz, which allows for small
external components, reduced output ripple, and guar-
antees no AM interference. Skip mode with low quies-
cent current of 52μA is available in the MAX20040B and
MAX20040D versions of the IC. The ICs can operate with
spread-spectrum frequency modulation designed to min-
imize EMI-radiated emissions due to the modulation fre-
quency.
• 20-Pin SWTQFN Package
● Low Quiescent Current Helps Designers Meet
Stringent OEM Current Requirements (B and D
Version only)
• 52μA Quiescent Current when in Standby Mode
• 10μA (max) Quiescent Current in Shutdown Mode
The MAX20039/MAX20040 are available in a small (4mm
x 4mm), 20-pin, side-wettable TQFN package and use
very few external components.
● High Switching Frequency Allows Use of Small
External Components
• 200kHz to 2.2MHz Operating Frequency
• Skip Mode for Efficient Low-Power Operation (B
and D version only)
• Fixed-Frequency PWM Mode
• External Frequency Synchronization
Applications
● Infotainment Systems
● Body Electronics
● Start-Stop Systems
● Point-of-Load (POL) Power Supply
● Power over Coax (PoC)
● Reduced EMI Emissions at the Switching Frequency
• Spread Spectrum Can be Enabled or Disabled
19-100271; Rev 14; 9/22
Ordering Information appears at end of data sheet.
© 2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2022 Analog Devices, Inc. All rights reserved.