Click here to ask an associate for production status of specific part numbers.
MAX20048
Automotive 40V, 55μA I , 2.2MHz, H-Bridge
Q
Buck-Boost Controller
General Description
Benefits and Features
The MAX20048 is a current-mode buck-boost controller.
The device operates with input voltages from 4.5V to 36V
while using only 55μA quiescent current at no load. Once
the startup conditions are satisfied, the device can oper-
ate over an extended input voltage range of 2V to 36V.
The switching frequency is resistor programmable from
220kHz to 2.2MHz and can be synchronized to an exter-
nal clock.
● Meets Stringent Automotive Quality and Reliability
Requirements
• Operating V Range: 2V to 36V Allows Operation
IN
In Cold-Crank Conditions
• Tolerates Input Transients to 40V
• EN Pin Compatible from +3.3V to +40V
• -40°C to +125°C Automotive Temperature Range
• AEQ-100 Qualified
The device output voltage is available as 5V fixed or ad-
justable from 4V to 25V. The wide input voltage range,
along with its ability to maintain constant output voltage
during battery transients, makes the devices ideal for au-
tomotive applications. In light-load applications, a logic in-
put (FSYNC) allows the devices to operate either in skip
mode for reduced current consumption, or fixed- frequen-
cy, forced-PWM mode to eliminate frequency variation
and help minimize EMI. Protection features include cy-
cle-by-cycle current limit followed by hiccup during sus-
tained overloads, input under-voltage lockout (UVLO), out-
put overvoltage protection and thermal shut- down with
automatic recovery.
● Efficient Solution in a Small Solutions Size
• Skip Mode for Efficient Low Power Operation
• Fixed 5V Output Voltage and Adjustable 4V to 25V
• High Switching Frequency Allows Use of Small
External Components
• Small 4mm x 4mm 24-Pin SWTQFN Package
● Low Quiescent Current Helps Designers Meet
Stringent OEM Current Requirements
• 55μA Quiescent Current When in Stand-By Mode
• 10μA (max) Quiescent Current in Shutdown
● EMI Mitigation to meet CISP25 Class 5 Requirements
• 220kHz to 2.2MHz Operating Frequency
• Fixed-Frequency PWM Mode
The MAX20048 is available in a small 4mm x 4mm 24-pin
TQFN-EP SW package.
• External Frequency Synchronization or SYNC OUT
Capability (Selectable by OTP Option)
• Spread Spectrum Can Be Enabled or Disabled for
the IC by OTP Option
Applications
● Infotainment Systems
● Body Electronics
● Start-Stop Systems
● Point of Load Power Supply
● USB Power Delivery
19-100306; Rev 3; 2/21
Ordering Information appears at end of data sheet.
© 2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2022 Analog Devices, Inc. All rights reserved.