Click here to ask an associate for production status of specific part numbers.
Low-Voltage, Precision, Single/Dual/Triple/
Quad-Voltage μP Supervisors
MAX16132–MAX16135
General Description
Benefits and Features
The MAX16132–MAX16135 are low-voltage, ±1% accu-
rate, single, dual, triple, and quad-voltage μP supervisors
that monitor up to 4 system-supply voltages for undervolt-
age and overvoltage faults. The MAX16132–MAX16134
feature independent reset outputs, while the MAX16135
features dual reset outputs. For the MAX16132–
MAX16134, a reset output asserts when the voltage at
its corresponding input falls outside a factory-trimmed un-
dervoltage and overvoltage window threshold. The reset
is maintained for a minimum timeout period after voltage
at the input falls within the factory-set window threshold.
For the MAX16135, a reset output asserts when either,
or both, of the corresponding inputs fall outside the facto-
ry-trimmed undervoltage and overvoltage window thresh-
olds. See the Selector Guide for available options. These
integrated supervisory circuits significantly improve sys-
tem reliability and reduce size compared to separate ICs
or discrete components.
● High Precision
• ±1% Threshold Accuracy over Temperature
● Programmable OV Threshold: 104% to 111%
● Programmable UV Threshold: 89% to 96%
● Programmable Input Voltage from 1.0V to 5.0V
● Low 15μA Supply Current
● Quad-Input Monitor
● 23 Programmable Reset Timeout Periods
● Immune to Short Monitored Supply Transients
● Guaranteed Correct Logic State Down to V
● Open-Drain Outputs
● Small SOT23 Package
= 1.07V
DD
● -40°C to +125°C Automotive Operating Temperature
Range
● AEC-Q100 Qualified (/V Part Numbers, See Ordering
Information)
The MAX16132–MAX16135 are fixed-threshold devices.
The nominal input voltage for any input is factory-program-
mable from 1.0V to 5.0V, providing a wide range of thresh-
old selections. The window threshold levels are factory-
programmable from ±4% to ±11%, with ±1% resolution
and 0.25% or 0.50% hysteresis. The ±1% threshold ac-
curacy over temperature and window threshold monitoring
make these devices ideal for automotive ADAS applica-
tions.
The reset outputs are active-low, open-drain, and are
guaranteed to be in the correct reset output logic state
when V
remains greater than 1.07V. All devices are
DD
offered with 23 reset timeout periods ranging from 20µs
(min) to 1200ms (min). All reset outputs share the same
factory-set reset timeout period.
The MAX16132–MAX16135 are available in a small 8-pin
SOT23 package and specified over the automotive tem-
perature range of -40°C to +125°C.
Applications
● ADAS
● Multivoltage ASICs
● Storage Equipment
● Servers
19-8708; Rev 25; 12/21
Ordering Information appears at end of data sheet.
© 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2021 Analog Devices, Inc. All rights reserved.