MAX14657/MAX14658/
MAX14659
Dual-Channel USB Host Adapter Emulators
General Description
Benefits and Features
●ꢀ IntegratedꢀDualꢀChannels
The MAX14657/MAX14658/MAX14659 are next-genera-
tion dual-channel USB 2.0 host-charger adapter emula-
tors that combine USB Hi-Speed analog switches with a
USB adapter emulator circuit.
•ꢀ More Convenient, High-Current USB Charging
Ports for Users
•ꢀ Simple and Flexible Power-Management Control
•ꢀ Small TQFN Package Minimizes PCB Area
2
The MAX14657 features an I C interface to fully configure
the charging behavior with different address options.
The MAX14658/MAX14659 are controlled by two GPIO
inputs (CB1_/CB0_) and support USB data and automatic
charger mode. In charging downstream port (CDP) mode,
the devices emulate the CDP function while supporting
normal USB traffic. The MAX14657/MAX14658 have a
CEN_ output for an active-high CLS enable input, and
the MAX14659 has a CEN_ output for an active-low CLS
enable input to restart the peripheral connected to the
USB host.
●ꢀ ImprovedꢀChargerꢀInteroperability
•ꢀ USB (CDP) Emulation with Smart CDP and Fool-
Proof CDP
•ꢀ Enhanced Automodes
•ꢀ Foolproof CDP
•ꢀ Meets New USB Battery Charging (BC) Revision
1.2 Specification
•ꢀ Backward Compatible with Previous USB BC
Revisions
•ꢀ Meets China YD/T1591-2009 Charging
Specification
•ꢀ Supports Standby-Mode Charging for USB BC
Revision 1.2 Compatible Devices
The MAX14658/MAX14659 feature 2A high-current
autodetect mode. The MAX14657 can be configured
2
through I C to support various dedicated charger modes
such as Apple 1A/2A forced, or Apple or Samsung 1A/2A
autodetect modes.
●ꢀ ProvideꢀGreaterꢀApplicationꢀFlexibility
2
•ꢀ I C Controls Multiple Modes (MAX14657)
•ꢀ A Slave Address Selection Input Offers Two
Possible Slave Addresses for Each Emulator
(MAX14657)
•ꢀ CB0_ and CB1_ Pins Control Multiple Automatic
and Manual Charger States (MAX14658, MAX14659)
The MAX14657/MAX14658/MAX14659 support CDP and
standard downstream port (SDP) charging while in the
active state (S0), and support the dedicated charging
port (DCP) charging while in the standby state (S3/S4/
S5). All of the devices support low-speed remote wake-up
by monitoring DM_, and also support remote wakeup in
sleep mode (S3).
●ꢀ EnhanceꢀPerformanceꢀwithꢀHighꢀLevelꢀofꢀIntegratedꢀ
Features
•ꢀ Supports Remote Wake-Up
•ꢀ Low-Capacitance USB 2.0 Hi-Speed Switch to
Change Charging Modes
•ꢀ Automatic Current-Limit Switch Control
•ꢀ ±15kV ESD Protection on DP_/DM_
The MAX14657/MAX14658/MAX14659 are available in a
16-pin (3mm x 3mm) TQFN-EP package and are speci-
fied over the -40°C to +85°C extended temperature range.
Applications
●ꢀ Laptop/DesktopꢀComputers
●ꢀ USBꢀHubs
Selector Guide
●ꢀ UniversalꢀChargersꢀIncludingꢀiPod®/iPhone®/iPad®
REMOTE
WAKE-UP IN
AM
PART
NUMBER
I/O
MODE
CEN
POLARITY
iPod®/iPhone®/iPad® are registered trademarks of Apple, Inc
Ordering Information and Typical Operating Circuit appear
at end of data sheet.
Programmable
(CEN default)
MAX14657
I2C
Programmable
For related parts and recommended products to use with this part, refer
to www.maximintegrated.com/MAX14657.related.
MAX14658
MAX14659
GPIO
GPIO
CEN
Yes
Yes
CEN
19-6664; Rev 1; 8/13