Click here to ask an associate for production status of specific part numbers.
Portable Medical Power Management Solution
with Cable Detection
MAX14663
General Description
The MAX14663 is a complete power solution for portable
Benefits and Features
●
High-Efficiency Switching Charger Tailored for Small
medical devices, including blood glucose meters.
Capacity Batteries Saves Space, Extends Battery Life
The device integrates a high-efficiency single-cell Li-ion
switching charger targeted at space-limited portable
applications with small batteries.
● Battery Isolation Switch Extends Battery Shelf Life
• Hardware/Software Configurable
• Integrated Power-Key Monitor
● Integration Simplifies and Shrinks Display Driving
Circuitry
An ultra low-power seal mode which significantly reduces
standby current and preserves battery charge during
prolonged periods of storage is also included. This mode
extends battery shelf life, and enables improved customer
experience with immediate out-of-box use.
• 3-Channel Programmable-LED Current Sinks
• Integrated Step-Up Converter
● Integrated Protection and Control for Reliable
Performance
Additionally, the MAX14663 embeds a Maxim proprietary
ModelGaugeTM (fuel gauge), which provides an accurate
estimate of the available capacity for rechargeable Li-ion
batteries.
• Fully Integrated Cable Detection Controller to
Ensure Measurement Accuracy
• Overvoltage and Thermal Protection
- 28V Tolerant VB Input Connection
• High ESD Protection (VB, DP, DM, KIN)
- ±15kV HBM ESD Protection
A boost converter and LED current sinks are also integrat-
ed for powering OLED displays or LED backlights.
Internal cable-detection circuitry enables the MAX14663
to identify the presence of an unpowered/unconnected
USB cable. This information can be used by the portable
system to intelligently select its operating mode, maximizing
accuracy and minimizing measurement errors.
- ±10kV Air-Gap Protection
- ±8kV Contact Discharge Protection
• Manual Reset Controller
2
• Programmable Interrupt Generation (I C)
● Integrated ModelGauge Host-Side Fuel Gauge Saves
Space and Accurately Estimates State of Charge
• ModelGauge Algorithm
The MAX14663 operates over the -20°C to +70°C
temperature range and is available in a (5mm x 5mm),
40-pin, TQFN-EP package.
• Tolerates Temperature & Load Variation
• No Error Accumulation
• Learning Not Necessary
Applications
● Portable Blood Glucose Meters
● Portable Medical Devices
● USB Connected Devices
• Current-Sense Resistor Not Required
Ordering Information appears at end of data sheet.
ModelGaugeTM is a registered trademark of Maxim Integrated
Products, Inc.
19-6817; Rev 6; 8/20
©
2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A.
|
Tel: 781.329.4700
|
© 2023 Analog Devices, Inc. All rights reserved.