19-5741ꢀ Rev 2ꢀ 11/11
24-/16-Bit, 4-Channel, Simultaneous-Sampling,
Cascadable, Sigma-Delta ADCs
4K/MAX160
General Description
Features
o Four Fully Differential Simultaneously Sampled
The MAX11040K/MAX11060 are 24-/16-bit, 4-channel,
simultaneous-sampling, sigma-delta analog-to-digital
converters (ADCs). The devices allow simultaneous
sampling of as many as 32 channels using a built-in
cascade feature to synchronize as many as eight
devices. The serial interface of the devices allows read-
ing data from all the cascaded devices using a single
command. Four modulators simultaneously convert
each fully differential analog input with a programmable
data output rate ranging from 0.25ksps to 64ksps. The
devices achieve 106dB SNR at 16ksps and 117dB SNR
at 1ksps (MAX11040K). The devices operate from a
single +3V supply. The differential analog input range is
2.2V when using the internal referenceꢀ an eꢁternal
reference is optional. Each input is overvoltage protect-
ed up to 6V without damage. The devices use an
internal crystal oscillator or an eꢁternal source for clock.
Channels
o Cascadable for Up to 32 Channels of
Simultaneous Sampling
o 106dB (MAX11040K) SNR at 16ksps
o 117dB (MAX11040K) SNR at 1ksps
o 0.25% Error Over a 1000:1 Dynamic Range,
Processed Over 16.7ms (MAX11040K)
o
o
2.2ꢀ FullꢁScale ꢂnput Range
6ꢀ Overvoltage Protected ꢂnputs
o ꢂnternal Crystal Oscillator
o 2.5ꢀ, 50ppm/°C ꢂnternal Reference or External
Reference
o Programmable Output Data Rate
0.25ksps to 64ksps Range
0.065% Resolution
o Programmable Sampling Phase
0 to 333µs Delay in 1.33µs Steps
The devices are compatible with SPI™, QSPI™,
MICROWIRE™, and DSP-compatible 4-wire serial inter-
faces. An on-board interface logic allows one serial inter-
face (with a single chip select) to control up to eight
cascaded devices or 32 simultaneous sampling analog
input channels.
o SPꢂꢁ/QSPꢂꢁ/MꢂCROWꢂREꢁ/DSPꢁCompatible 4ꢁWire
Serial ꢂnterface
o Cascadable ꢂnterface Allows Control of Up to
Eight Devices with a Single CS Signal
o 3.0ꢀ to 3.6ꢀ Analog Supply ꢀoltage
The devices are ideally suited for power-management
systems. Each channel includes an adjustable sam-
pling phase enabling internal compensation for phase
shift due to eꢁternal dividers, transformers, or filters at
the inputs. The output data rate is adjustable with a
0.065% resolution (at 16ksps or below) to track the
varying frequency of a periodic input. A SYNC input
allows periodic alignment of the conversion timing of
multiple devices with a remote timing source.
o 2.7ꢀ to ꢀ
Digital Supply ꢀoltage
AꢀDD
o 38ꢁPin TSSOP Package
Functional Diagram
OVRFLW FAULT
The devices are available in a 38-pin TSSOP package speci-
fied over the -40°C to +105°C industrial temperature range.
AIN0+
AIN0-
SYNC
24-/16-BIT
ADC
DIGITAL
FILTER
Applications
Power-Protection Relay Equipment
Multiphase Power Systems
DRDYIN
REF0
AIN1+
AIN1-
DRDYOUT
24-/16-BIT
ADC
DIGITAL
FILTER
REGISTERS AND
DIGITAL
CONTROL
CASCIN
SERIAL
INTERFACE
CASCOUT
REF1
AIN2+
24-/16-BIT
ADC
DIGITAL
FILTER
Industrial Data-Acquisition Systems
Medical Instrumentation
CS
AIN2-
SCLK
REF2
AIN3+
DIN
24-/16-BIT
ADC
DIGITAL
FILTER
AIN3-
REF3
DOUT
Ordering Information
PART
MAX11040KGUU+ -40°C to +105°C
MAX11060GUU+ -40°C to +105°C
TEMP RANGE
PꢂNꢁPACKAGE
38 TSSOP
MAX11040K
MAX11060
2.5V
REFERENCE
CRYSTAL
OSCILLATOR
REFIO
38 TSSOP
+Denotes a lead(Pb)-free/RoHS-compliant package.
AGND
XIN
XOUT
CLKOUT
DGND
MICROWIRE is a trademark of National Semiconductor Corp.
SPI/QSPI are trademarks of Motorola, Inc.
________________________________________________________________ Maxim ꢂntegrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1ꢁ888ꢁ629ꢁ4642,
or visit Maxim’s website at www.maximꢁic.com.