19-4250; Rev 2; 3/11
4-Channel, 16-Bit, Simultaneous-Sampling ADCs
with PGA, Filter, and 8-/12-Bit Dual-Stage DAC
MAX1043
General Description
Features
o 4 Single-Ended or Differential Channels of
The MAX11043 features 4 single-ended or differential
channels of simultaneous-sampling ADCs with 16-bit
resolution. The MAX11043 contains a versatile filter
block and programmable-gain amplifier (PGA) per
channel. The filter consists of seven cascaded 2nd-
order filter sections for each channel, allowing the con-
struction of a 14th-order filter. The filter coefficients are
user-programmable. Configure each 2nd-order filter as
lowpass (LP), highpass (HP), or bandpass (BP) with
optional rectification. Gain and phase mismatch of the
analog signal path is better than -50dB.
Simultaneous-Sampling, 16-Bit ADCs
1ꢀ ꢁSB ꢂIꢁ, 1 ꢁSB DIꢁ, Io ꢃissing Codes
o
o 93dB SFDR at 1ꢀꢀkHz ꢂnput
o PGA with Gain of 1, 2, 4, 8, 16, 32, or 64 for
Each Channel
o EQ Function Automatically Boosts
High-Frequency, ꢁow-Amplitude Signals
o Seven-Stage ꢂnternal Programmable Biquad
Filters per Channel
o High Throughput, 4ꢀꢀksps per Channel for 4
The ADC can digitize signals up to 200kHz. A 40MHz
serial interface provides communication to and from the
device. The SPI™ interface provides throughput of
1600ksps; 4 channels at 400ksps per channel or 2
channels at 800ksps per channel. A software-selec-
table scan mode allows reading the ADC results while
simultaneously updating the DAC. Other features of the
MAX11043 include an internal (+2.5V) or external
(+2.0V to +2.8V) reference, power-saving modes, and
a PGA with gains of 1 to 64. The PGA includes an
equalizer (EQ) function that automatically boosts low-
amplitude, high-frequency signals for applications such
as CW-chirp radar.
Channels
o Dual-Stage DAC
Two 8-Bit Coarse Reference DACs
12-Bit Fine DAC
o +2.5V ꢂnternal Reference or +2.ꢀV to +2.8V
External Reference
o Single +3.3V Operation
o Shutdown and Power-Saving ꢃodes
o 4ꢀ-Pin, 6mm x 6mm TQFI Package
o -4ꢀ°C to +125°C Operating Temperature
Ordering Information
The MAX11043 includes two 8-bit coarse DACs that set
the high and low references for a second-stage 12-bit
fine DAC, typically used for VCO control. Use software
controls to write to the DAC or step the DAC up and
down under hardware control in programmable steps.
The device operates from a +3.0V to +3.6V supply. The
MAX11043 is available in a 40-pin, 6mm x 6mm TQFN
package and operates over the extended -40°C to
+125°C temperature range.
PART
TEꢃP RAIGE
-40°C to +125°C
-40°C to +125°C
PꢂI-PACKAGE
40 TQFN-EP*
40 TQFN-EP*
MAX11043ATL+
MAX11043ATL/V+**
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
*EP = Exposed pad.
**Future product—contact factory for availability.
Pin Configuration
TOP VIEW
Applications
30 29 28 27 26 25 24 23 22 21
20
31
32
33
OSCOUT
AINDN
AINDP
AGND
Automotive Radar Systems
Data Acquisition Systems
Industrial Controls
19 OSCIN
18 EOC
17 I.C.
REFBP 34
16
SCLK
15 DIN
14
35
36
37
38
39
40
I.C.
AINCN
AINCP
REFC
Power-Grid Monitoring
MAX11043
DOUT
13 CS
12
*EP
+
CONVRUN
11 DACSTEP
REFB
AINBP
1
2
3
4
5
6
7
8
9
10
SPI is a trademark of Motorola, Inc.
TQFI
*CONNECT EP TO AGND.
________________________________________________________________ ꢃaxim ꢂntegrated Products
1
For pricing, delivery, and ordering information, please contact ꢃaxim Direct at 1-888-629-4642,
or visit ꢃaxim’s website at www.maxim-ic.com.