MA12070
Filterless and High-Efficiency +4V to +26V
Audio Amplifier with Analog Input
Description
Features
The MA12070 is a super-efficient audio power amplifier
based on proprietary multi-level switching technology.
It supports a 4-26V supply voltage range, allowing it to
be used in many different applications.
•
Proprietary Multi-level Switching Technology
◦
3-level and 5-level modulation
◦
◦
Low EMI emission
Filterless amplification
Multi-level switching enables very low power loss
during operation. In addition, it allows the amplifier to
be used in filterless configurations at full rated power
in a wide range of audio products.
◦
Digital Power Management Algorithm
•
•
High Power Efficiency (PMP4)
◦
<160mW Idle power dissipation (26V PVDD,
all channels switching)
The MA12070 features an embedded digital power
management scheme. The power management
algorithm dynamically adjusts switching frequency and
modulation to optimize power loss and EMI across the
output power range.
◦
◦
>80% Efficiency at 2W power (1kHz sine, 8Ω)
>91% Efficiency at Full Power (1kHz sine, 8Ω)
Audio Performance (PMP2)
◦
>110dB DNR (A-w, rel. to 1% THD+N power
level)
A 4th order feedback loop ensures low distortion and a
high PSRR.
◦
◦
45µV output integrated noise (A-w)
0.004% THD+N at high output levels
The MA12070 operates from a single power stage
supply voltage (PVDD) and a +5V system supply voltage
(DVDD, AVDD).
•
•
4th Order Feedback Error Control
◦
◦
High suppression of supply disturbance
HD audio quality
Highly flexible output stage configurations are offered,
ranging from four single-ended outputs to a single
parallel-BTL output.
Supply Voltages: +4V to +26V (PVDD) and +5V
(A/DVDD)
•
•
Selectable Gain (20dB/26dB)
The MA12070 features protection against DC, short-
2x30W continuous output power (RL = 8Ω at 22V,
PMP4, 10% THD+N level, without heatsink)
circuits,
over-temperature
and
under-voltage
situations.
•
2×80W peak output power (26V PVDD, RL = 4Ω,
10% THD+N level)
Flexible “Power Mode Profiles” allow the user to utilize
the multi-level switching technique for very low power
loss or very high audio performance.
•
•
2.0, 2.1, 4.0, 1.0 Output Stage Configurations
Protection
◦
◦
◦
◦
◦
◦
Under-voltage-lockout
Device configuration is controlled through an I2C
interface as well as dedicated control pins.
Over-temperature warning/error
Short-circuit/overload protection
Power stage pin-to-pin short-circuit
Error-reporting through serial interface (I2C)
DC protection
Applications
•
•
•
•
•
Battery Operated Speakers
Wireless and Docking Speakers
Soundbars
•
•
I2C control (four selectable addresses)
Heatsink free operation with EPAD-down package
Package
Multiroom Systems
•
64-pin QFN Package with exposed thermal pad
(EPAD) and Lead-free Soldering
Home Theater Systems
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 86
V 1.0
2018-07-17