M Series Heatsinks
Heatsink with clips for TO-264 and TO-247
F ꢀ ꢁꢂ u ꢃ ꢀ S
•ꢀMinimumꢀassemblyꢀcostꢀandꢀlabor.ꢀSpringꢀClipsꢀ
makeꢀtheꢀmountingꢀholesꢀandꢀfastenersꢀobsoleteꢀinꢀ
assemblyꢀoperationsꢀ&ꢀreduceꢀcosts.
•ꢀMaximumꢀThermalꢀTransfer.ꢀMaximumꢀsurfaceꢀareaꢀ
perꢀunitꢀvolume,ꢀefficientꢀcoolingꢀfinsꢀ&ꢀconsistentꢀ
mountingꢀforceꢀreducesꢀthermalꢀresistance
•ꢀMaximumꢀRepeatability.ꢀConstantꢀspringꢀforceꢀoverꢀ
repeatedꢀassembly/disassemblyꢀ
•ꢀMaximumꢀReliability.ꢀResilientꢀspringꢀactionꢀlocksꢀ
electronicꢀcomponentꢀinꢀplace.ꢀFewerꢀpartsꢀinꢀ
assemblyꢀandꢀnoꢀfastenersꢀandꢀwashersꢀrequired.ꢀ
Preventꢀshortꢀcircuitꢀbyꢀeliminatingꢀmetalꢀparticlesꢀ
generatedꢀfromꢀhardwareꢀorꢀthreadꢀtapping
•ꢀDesignꢀFlexibility.ꢀMaximumꢀflexibilityꢀforꢀdynamicꢀ
deviceꢀlocationsꢀandꢀpowerꢀupꢀgrading.ꢀ“Configure-
to-Fit”ꢀ&ꢀ“Scale-to-Meet”ꢀoptionsꢀgiveꢀdesignersꢀtheꢀ
totalꢀfreedomꢀtoꢀconfigureꢀtheꢀheatꢀsinkꢀtoꢀfitꢀtheirꢀ
packagingꢀdesignsꢀandꢀtoꢀscaleꢀtheꢀheatꢀsinkꢀꢀtoꢀ
meetꢀtheirꢀpowerꢀdissipations.
OhmiteꢀintroducesꢀtheꢀMꢀseries,ꢀꢀpatentedꢀ(Pat.ꢀNo.ꢀ
7,151,669),ꢀhighꢀperformance,ꢀlowꢀcost,ꢀconfigu-
rable,ꢀscalableꢀandꢀcompactꢀheatꢀsinkꢀwithꢀmatrixꢀclipꢀ
systemꢀforꢀTO-247ꢀandꢀTO-264ꢀpackages.ꢀThisꢀpow-
erfulꢀheatꢀsinkꢀprovidesꢀtheꢀeasiestꢀassembly,ꢀlargestꢀ
surfaceꢀareaꢀandꢀsmallestꢀfootprint.ꢀItꢀisꢀtheꢀidealꢀ
typeꢀofꢀheatꢀsinkꢀforꢀhighꢀpowerꢀdensityꢀandꢀsmallꢀ
sizeꢀ(1Uꢀorꢀ2U)ꢀelectronicꢀpackagingꢀwithꢀforcedꢀcon-
vectionꢀcooling.
SꢀꢃꢄꢀS SpꢀCꢄFꢄCꢁꢂꢄoꢅS
Thermal
Weight Resistance
Surface Area
Part No.
(in2/mm2)
(oz./g)
(°c/w)*
6.0
5.2
9.6
8.0
MV-102-55E 45 / 29,097
MA-102-55E 45 / 29,097
MV-101-27E 22 / 14,284
MA-101-27E 22 / 14,284
2.2 / 63
2.2 / 63
1.1 / 31
1.1 / 31
MV-302-55E 76 / 49,218 4.7 / 134
MA-302-55E 76 / 49,218 4.7 / 134
MV-301-27E 37.3 / 24,161 2.3 / 66
MA-301-27E 37.3 / 24,161 2.3 / 66
3.6
3.0
5.5
4.6
* R-theta
c-a
for 18W dissipation total for two devices in natural convection
CHꢁꢃꢁCꢂꢀꢃꢄSꢂꢄCS
Aluminum Alloy 6063-T5 or Equivalent with either degreased or black anodized
finish.
Heat Sink
Music Wire, Per ASTM A228 with bright nickel plating
Spring Clip
Solder Foot
Cold-rolled Steel, Per ASTM A-366 with pure tin over copper strike. RoHS com-
pliant.
Thermal joint compound or 0.005 Grafoil (TGon 800 by Laird)
Sil-Pad 900S by Bergquist or equivalent
Interface thermal resistance
Interface electrical isolation
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
177