BACKSHELL TYPE
Band Lock
Adapter
Pre-Shield
Adapter
SQ
Adapter
A high quality band will do the job with
this backshell. Tempered bands are tight-
ened over the shields, which are pulled
over the banding area using a special as-
sembly tool. Suitable over cover by heat
shrink boot or some other method as cho-
sen by the designer could be used. Both
crimp ring and banded terminations give
a low DC resistance.
This adapter comes with a pre-cut braid
that is fitted to the adapter for easy as-
sembly. The braid overlaps with the ca-
ble braid. Effective shielding takes place
due to the 360° contact of the braid. De-
signed to accept heat shrink boot. Ease
of assembly saves time for cable termi-
nation.
The SQ adapter is a cost-effective way
to terminate the braid to the adapter. The
braid is pulled over the conical shape to
the rear end of the adapter and then tied.
The end nut is tightened to ensure ade-
quate grip for the shielding. A heat shrink
boot can be used with this adapter as
well.
Strain Relief
Clamps
Lamp Thread
Adapter
Grommet
Nut
If environmental protection is not a con-
cern and weight savings is a major con-
sideration this strain relief clamp is what
you need. It secures and “tidys-up” the
light/medium cable and also provides
good strain relief at the termination area.
An adapter with threads similar to that
in the lamp base for shield termination.
An effective, easy and quick method of
shield termination and field maintenance.
Termination area can accept a nut as well
as a clamp. The nut option enables the
use of heat shrink boot and the clamp op-
tion will facilitate the strain relief clamping
without heat shrink boot after the shield/
cable termination.
Provides a good grommet-holding force
for the crimp connectors when expensive
and heavy backshells are not used. Such
holding force is essential to hold the con-
tacts and grommet in place when termi-
nated with wire bundles.
Quick
Clamp
Alight weight clamp used for securing and
“tidying up” cable into a desired direction.
Used in interior wiring of aircraft.
www.amphenolpcd.com
info@amphenolpcd.com OR sales@backshellworld.com
1(978) 624-3400
72 Cherry Hill Drive, Beverly, MA 01915
7