Totalizers mechanic
Meter counters with imprint feature PTB approved, adding
Display 5 digits, manual reset by lever
M 275
Features
– PTB Meter counter, large
– Adding
– Display 5-digits
– Imprint of the measured result on cards
– Reset by lever
M 275 - PTB Meter counter
Technical data - mechanical design
Description
Besides measuring operations, counter M 275 enables
imprint of the measured result on labels what means a
considerable benefit compared to standard displays for
pure readout. Imprint and reset are manual operations with
automatical ink ribbon transport. The counter is driven either
directly by the measuring roller or by measuring wheels
running over the surface of the measured material. The
meter counter goes together with measuring wheels of 0.5
m circumference.
Function
Display
PTB Meter counter with imprint
White numbers on black
1st number wheel with scale
Number of digits
Digit height
4-digits
7 mm (numeral readout)
4.5 mm (printed numerals)
Reset
Manual by reset lever
By lever upon reset
Labels
Imprint
Calibrated meter counters with imprint function
Meter counter M 275 is calibrated by the German Physical-
Technical Institute (PTB) and approved for calibrated
measuring systems. However, our customers must apply for
calibration of the whole measuring system at the corre-
sponding calibration authorities.
Imprint on
Card thickness
Card width
Imprint correction
Ink ribbon
≤0.4 mm
28...72 mm
Imprint is rounded to 5 cm
Width 13 mm, length 3 m
automatic ink ribbon transport
Imprint correction balance
Count mode
Adding in a rotational direction
to be indicated, subtracting
in reverse direction.
Prior to imprint, the counter will always set respectively
reset the first digit to the nearest integer number what might
result in inferior deviation in each printing operation.
2 revs. = 10 counts
Drive shaft
Both sides, ø7 mm
2 revs. = 10 di. = <250.0 m/min
1 cm
Measuring speed
Measuring precision
Measuring range
Operating temperature
Housing type
999.99 m
0...+60 °C
Housing with ground plate
Hammertone green
200 x 115 x 75 mm
Housing colour
Dimensions W x H x L
Dimensions mounting plate 167 x 115 mm
Mounting
Surface mount housing
Weight approx.
Material
2200 g
Aluminium die cast alloy
www.baumerivo.com
1