LTC2875
±±60V FaulVꢀPolecled
3.30VoPV50V25k0VESDV
HighVSpeedVCANV DVTPFnsceiveP
DESCRIPTION
FEATURES
The LTC®2875 is a robust high speed, low power CAN
transceiver operating on 3.3V or 5V supplies that features
±±6V overvoltage fault protection on the data transmis-
sion lines during all modes of operation, including power-
down. The maximum data rate has been extended to
4Mbps to support high speed protocols based on the CAN
physical layer. Supports up to 4Mbps CAN with Flexible
Data Rate (CAN FD). Enhanced ESD protection allows
these parts to withstand ±25kV HBM on the transceiver
interface pins without latchup or damage.
n
Protected from Overvoltage Line Faults to ±±6V
3.3V or 5V Supply Voltage
High Speed CAN FD Operation Up to 4Mbps
±25kV ESD Interface Pins, ±8kV All Other Pins
Variable Slew Rate Driver with Active Symmetry
Control and SPLIT Pin for Low Electromagnetic
Emission (EME)
Extended Common Mode Range (±3±V)
Ideal Passive Behavior to CAN Bus with Supply Off
Current Limited Drivers and Thermal Shutdown
Power-Up/Down Glitch-Free Driver Outputs
Micropower Shutdown Mode
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Extended ±3±V input common mode range and high
common mode rejection on the CAN receiver provides
tolerance of large ground loop voltages. A sophisticated
CAN driver with active symmetry control maintains tight
control of the common mode voltage for excellent elec-
tromagnetic emission, while the variable slew rate and
split termination support allow additional EME reduction.
All registered trademarks and trademarks are the property of their respective owners.
Transmit Data (TXD) Dominant Timeout Function
ISO 11898-2 and CAN FD Compliant
DeviceNet Compatible
Up to MP-Grade Available (–55°C to 125°C)
3mm × 3mm 8-Lead DFN and SO-8 Packages
APPLICATIONS
n
Industrial Control and Instrumentation Networks
n
Automotive and Transportation Electronics
n
Building Automation, Security Systems, HVAC
Medical Equipment
n
TYPICAL APPLICATION
LTC2875 Transmitting at 4Mbps
from a 3.3V Supply
CAN Bus Link with Large Ground Loop Voltage
ꢈꢉꢅ
ꢊꢇꢄꢅꢆꢇ
LTC2875
R
LTC2875
V
V
CC2
CC1
CANH
120Ω
CANH
120Ω
R
RXD1
RXD2
Rꢉꢅ
ꢊꢇꢄꢅꢆꢇ
ꢋꢓꢔꢔꢓꢌ ꢔꢓꢅꢕ
TXD1
RS1
TXD2
RS2
CANL
CANL
D
D
ꢋAꢌꢍ
ꢀꢇꢄꢅꢆꢇ
GND1
GND2
AC GROUND
LOOP ≤ 36V
PEAK
2875 TA01a
ꢋAꢌꢎ
ꢀꢇꢄꢅꢆꢇ
ꢊꢏꢐꢑ ꢈAꢁꢀꢒ
ꢀꢁꢁꢂꢃꢄꢅꢆꢇ
Rev A
1
Document Feedback
For more information www.analog.com