Spec No.: JELF243A_9137J-01
P4/9
9. Specification of Packaging
9.1 Appearance and dimensions of tape (12 mm width/plastic tape)
A
B
t
3.6±0.1
4.9±0.1
2.7±0.1
(0.3)
t'
(in mm)
* The dimensions of the cavity are measured at its bottom.
* The packing direction of the chip coils in the taping is
unified with the in/out positions of the lead wires.
9.2 Taping specifications
Packing quantity
500 pcs/reel
(Standard quantity)
Packing method
Feed hole position
Joint
The products are placed in embossed cavities of a plastic tape and sealed by a cover tape.
The feed holes on the plastic tape are on the right side when the cover tape is pulled toward the user.
The plastic tape and the cover tape are seamless.
Number of missing
products
Number of missing products within 0.025% of the number per reel or 1 pc., whichever is greater, and
are not continuous. The specified quantity per reel is kept.
9.3 Break down force of tape
Break down force of plastic tape
Break down force of cover tape
10 N min.
5 N min.
9.4 Peeling off force of cover tape
Speed of peeling off
300 mm/min
Peeling off force
0.2 N to 0.7 N (The lower limit is for typical value.)
Cover tape
165 to 180 degree
F
Plastic tape
MURATA MFG CO., LTD