TLV62080
www.ti.com
SLVSAK9A –OCTOBER 2011–REVISED NOVEMBER 2011
1.2A High Efficient Step Down Converter in 2x2mm SON Package
Check for Samples: TLV62080
1
FEATURES
DESCRIPTION
DCS-ControlTM Architecture for Fast Transient
Regulation
The TLV62080 device is a synchronous step down
converter with an input voltage range of 2.5V to 5.5V.
The TLV62080 focuses on high efficient step down
conversion over a wide output current range. At
medium to heavy loads, the converter operates in
PWM mode and automatically enters Power Save
Mode operation at light load currents to maintain high
efficiency over the entire load current range.
•
•
•
•
•
•
•
•
•
2.5V to 5.5V Input Voltage Range
100% Duty Cycle for Lowest Dropout
Power Save Mode for Light Load Efficiency
Output Discharge Function
Power Good Output
To address the requirements of system power rails,
the internal compensation circuit allows a large
selection of external output capacitor values ranging
from 10µF up to 100uF effective capacitance. With its
DCS-ControlTM architecture excellent load transient
performance and output voltage regulation accuracy
is achieved. The device is available in 2mm x 2mm
SON package with Thermal PAD.
Thermal Shutdown
Available in 2x2mm 8-Pin SON Package
For Improved Features Set, See TPS62080
APPLICATIONS
•
•
•
Battery Powered Portable Devices
Point of Load Regulators
System Power Rail Voltage Conversion
POWER GOOD
180k
TLV62080
2.5V...5.5V
VIN
VIN
EN
PG
1mH
VOUT
SW
10µF
22µF
R1
GND
GND
VOS
FB
R2
Figure 1. Typical Application of TLV62080
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated