Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 428-1
Shielded Power Inductors
–
LPS3010
Halogen
Free
• Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall
• Very low DCR; excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
AEC
+
Q200 85°C
Weight 25 – 32 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.27 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3010-224MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
LPS3010-471MR_
LPS3010-681MR_
LPS3010-102MR_
LPS3010-152MR_
LPS3010-182MR_
0.47
0.68
1.0
1.5
1.8
0.070 370
0.080 270
0.085 230
0.120 165
0.150 150
1.8
1.6
1.5
1.3
1.2
1.9
1.7
1.6
1.4
1.2
2.0
1.7
1.6
1.4
1.3
1.3
1.3
1.1
1.80
1.75
1.50
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
1.05 1.40
1.00 1.40
Packaging: C=7″ machine-ready reel. EIA-481 em-
bossed plastic tape (1000 parts per
full reel). Quantities less than full
reel available: in tape (not machine
ready) or with leader and trailer ($25
charge).
LPS3010-222MR_
LPS3010-332MR_
LPS3010-472MR_
LPS3010-562MR_
LPS3010-682MR_
2.2
3.3
4.7
5.6
6.8
0.220 130
0.220 110
1.3
1.4
1.4
0.90 1.10
0.83 0.88 0.90 0.85 1.10
0.72 0.75 0.77 0.70 0.95
0.67 0.69 0.71 0.60 0.78
0.61 0.63 0.64 0.56 0.74
0.300
0.400
0.450
92
80
70
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
B=Less than full reel. In an effort to
simplify our part numbering system,
Coilcraft is eliminating the need for
multiple packaging codes. When
ordering, simply change the last let-
ter of your part number from B to C.
LPS3010-822MR_
LPS3010-103MR_
LPS3010-123MR_
LPS3010-153MR_
LPS3010-183MR_
8.2
10
12
15
18
0.520
0.540
0.700
0.950
1.10
62
58
47
43
40
0.56 0.59 0.59 0.53 0.70
0.50 0.53 0.55 0.48 0.64
0.46 0.49 0.50 0.44 0.58
0.41 0.43 0.44 0.37 0.48
0.38 0.40 0.41 0.33 0.47
LPS3010-223MR_
LPS3010-333MR_
LPS3010-473MR_
LPS3010-683MR_
22
33
47
68
1.20
2.00
3.20
3.50
5.25
36
27
21
21
14
0.32 0.35 0.36 0.30 0.41
0.25 0.27 0.28 0.26 0.35
0.23 0.24 0.25 0.22 0.31
0.20 0.21 0.22 0.20 0.28
0.14 0.16 0.17 0.18 0.24
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current. Click for
temperature derating information.
6. Current that causes the specified temperature rise
from 25°C ambient.This information is for reference
only and does not represent absolute maximum rat-
ings. Click for temperature derating information.
7. Electrical specifications at 25°C.
LPS3010-104MR_ 100
LPS3010-124MR_ 120
LPS3010-154MR_ 150
LPS3010-184MR_ 180
LPS3010-224MR_ 220
6.10
9.15
10.1
12.5
12
11
9
0.13 0.15 0.15 0.14 0.19
0.13 0.14 0.14 0.13 0.17
0.11 0.12 0.13 0.11 0.15
0.10 0.11 0.12 0.095 0.13
8
Coilcraft Designer’s Kit C392 contains samples of 0.56 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 2200 µH parts (3 each) from four series. For details of kit contents and to
order, contact Coilcraft or visit https://www.coilcraft.com/en-us/kits/.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 428-1 Revised 10/21/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.