5秒后页面跳转
捷配首页

Datasheet > LP2980AIM5X-2.9/NOPB
LP2980AIM5X-2.9/NOPB PDF预览

LP2980AIM5X-2.9/NOPB

更新时间： 2024-02-01 11:12:41
品牌 Logo 应用领域
德州仪器 - TI 光电二极管输出元件调节器
页数 文件大小 规格书
24页 1208K
描述
2.9V FIXED POSITIVE LDO REGULATOR, 0.225V DROPOUT, PDSO5, SOT-23, 5 PIN

阅读下载

中文翻译

获取价格

LP2980AIM5X-2.9/NOPB 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：SOT-23
包装说明：LSSOP, TSOP5/6,.11,37针数：5
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.63
可调性：FIXED最大回动电压 1：0.225 V
标称回动电压 1：0.12 V最大绝对输入电压：16 V
最大输入电压：16 V最小输入电压：3.9 V
JESD-30 代码：R-PDSO-G5JESD-609代码：e3
长度：2.92 mm最大电网调整率：0.0112%
湿度敏感等级：1功能数量：1
输出次数：1端子数量：5
工作温度TJ-Max：125 °C工作温度TJ-Min：-40 °C
最大输出电流 1：0.05 A最大输出电压 1：2.9725 V
最小输出电压 1：2.8275 V标称输出电压 1：2.9 V
封装主体材料：PLASTIC/EPOXY封装代码：LSSOP
封装等效代码：TSOP5/6,.11,37封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, LOW PROFILE, SHRINK PITCH包装方法：TAPE AND REEL
峰值回流温度（摄氏度）：260认证状态：Not Qualified
调节器类型：FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR座面最大高度：1.22 mm
子类别：Other Regulators表面贴装：YES
技术：BIPOLAR端子面层：Matte Tin (Sn)
端子形式：GULL WING端子节距：0.95 mm
端子位置：DUAL处于峰值回流温度下的最长时间：40
最大电压容差：2.5%宽度：1.6 mm
Base Number Matches：1

LP2980AIM5X-2.9/NOPB 数据手册

 浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第1页浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第2页浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第4页浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第5页浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第6页浏览型号LP2980AIM5X-2.9/NOPB的Datasheet PDF文件第7页 
LP2980-N  
www.ti.com  
SNOS733M –APRIL 2000–REVISED JUNE 2013  
ABSOLUTE MAXIMUM RATINGS(1)(2)  
Storage Temperature Range  
Operating Junction Temperature Range  
Lead Temperature (Soldering, 5 sec.)  
ESD Rating(3)  
−65°C to +150°C  
−40°C to +125°C  
260°C  
2 kV  
Power Dissipation(4)  
Internally Limited  
−0.3V to +16V  
2.1V to +16V  
Input Supply Voltage (Survival)  
Input Supply Voltage (Operating)  
Shutdown Input Voltage (Survival)  
Output Voltage (Survival)(5)  
−0.3V to +16V  
−0.3V to +9V  
IOUT (Survival)  
Input-Output Voltage (Survival)(6)  
Short Circuit Protected  
−0.3V to +16V  
(1) Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply  
when operating the device outside of its rated operating conditions.  
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and  
specifications.  
(3) The ESD rating of pins 3 and 4 for the SOT-23 package is 1 kV.  
(4) The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-to-ambient thermal  
resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated  
using:  
The value of θJA for the SOT-23 package is 220°C/W. Exceeding the maximum allowable power dissipation will cause excessive die  
temperature, and the regulator will go into thermal shutdown.  
(5) If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2980-N output must be diode-clamped  
to ground.  
(6) The output PNP structure contains a diode between the VIN and VOUT terminals that is normally reverse-biased. Reversing the polarity  
from VIN to VOUT will turn on this diode (See REVERSE CURRENT PATH).  
ELECTRICAL CHARACTERISTICS  
Limits in standard typeface are for TJ = 25°C, and limits in boldface type apply over the full operating temperature range.  
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, COUT = 1 μF, VON/OFF = 2V.  
Symbol  
Parameter  
Conditions  
Typ  
LP2980AI-XX(1)  
LP2980I-XX(1)  
Units  
Min  
−0.50  
−0.75  
−2.5  
Max  
0.50  
0.75  
2.5  
Min  
−1.0  
−1.5  
−3.5  
Max  
1.0  
1.5  
3.5  
IL = 1 mA  
ΔVO  
Output Voltage Tolerance  
%VNOM  
%/V  
1 mA < IL < 50 mA  
Output Voltage Line  
Regulation  
VO(NOM) + 1V ≤ VIN ≤ 16V  
0.014  
0.032  
0.014  
0.032  
0.007  
IL = 0  
3
5
3
5
1
7
IL = 1 mA  
IL = 10 mA  
IL = 50 mA  
10  
15  
10  
15  
VIN–VO  
Dropout Voltage(2)  
mV  
60  
90  
60  
90  
40  
120  
150  
225  
150  
225  
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical  
Quality Control (SQC) methods. The limits are used to calculate Average Outgoing Quality Level (AOQL).  
(2) Dropout voltage is defined as the input to output differential at which the output voltage drops 100 mV below the value measured with a  
1V differential.  
Copyright © 2000–2013, Texas Instruments Incorporated  
Submit Documentation Feedback  
3
Product Folder Links: LP2980-N  
 
 
1234567...24

中文翻译

下载PDF

与LP2980AIM5X-2.9/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LP2980AIM5X-3.0 TI

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator In SOT-23 Package
LP2980AIM5X-3.0 NSC

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator
LP2980AIM5X-3.0/NOPB NSC

获取价格

 		IC VREG 3 V FIXED POSITIVE LDO REGULATOR, 0.225 V DROPOUT, PDSO5, SOT-23, 5 PIN, Fixed Pos
LP2980AIM5X-3.0/NOPB TI

获取价格

 		Micropower 50-mA Ultra Low-Dropout Regulator in SOT-23 Package
LP2980AIM5X-3.1 NSC

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator
LP2980AIM5X-3.1/NOPB TI

获取价格

 		3.1V FIXED POSITIVE LDO REGULATOR, 0.225V DROPOUT, PDSO5, SOT-23, 5 PIN
LP2980AIM5X-3.2 NSC

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator
LP2980AIM5X-3.2 TI

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator In SOT-23 Package
LP2980AIM5X-3.2/NOPB TI

获取价格

 		3.2V FIXED POSITIVE LDO REGULATOR, 0.225V DROPOUT, PDSO5, SOT-23, 5 PIN
LP2980AIM5X-3.3 TI

获取价格

 		Micropower 50 mA Ultra Low-Dropout Regulator In SOT-23 Package

与LP2980AIM5X-2.9/NOPB相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证