Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LMH6654, LMH6655
SNOS956E –JUNE 2001–REVISED AUGUST 2014
LMH6654, LMH6655 Single and Dual Low Power, 250 MHz, Low Noise Amplifiers
1 Features
3 Description
The LMH6654 and LMH6655 single and dual high
speed voltage feedback amplifiers are designed to
have unity-gain stable operation with a bandwidth of
250 MHz. They operate from ±2.5 V to ±6 V and each
channel consumes only 4.5 mA. The amplifiers
feature very low voltage noise and wide output swing
to maximize signal-to-noise ratio, and possess a true
single supply capability with input common mode
voltage range extending 150 mV below negative rail
and within 1.3 V of the positive rail. The high speed
and low power combination of the LMH6654 and
LMH6655 make these products an ideal choice for
many portable, high speed applications where power
is at a premium.
1
•
(VS = ±5 V, TJ = 25 °C, Typical Values Unless
Specified)
•
•
•
•
•
•
•
•
•
•
Voltage Feedback Architecture
Unity Gain Bandwidth 250 MHz
Supply Voltage Range ±2.5V to ±6V
Slew Rate 200 V/µsec
Supply Current 4.5 mA/channel
Input Common Mode Voltage −5.15V to +3.7V
Output Voltage Swing (RL = 100 Ω) −3.6V to 3.4V
Input Voltage Noise 4.5 nV/√Hz
Input Current Noise 1.7 pA/√Hz
Settling Time to 0.01% 25 ns
The LMH6654 and LMH6655 are built on TI’s
Advance VIP10™ (Vertically Integrated PNP)
complementary bipolar process.
2 Applications
•
•
•
•
•
•
ADC Drivers
The LMH6654 is packaged in 5-Pin SOT-23 and 8-
Pin SOIC. The LMH6655 is packaged in 8-Pin
VSSOP (DGK) and 8-Pin SOIC.
Consumer Video
Active Filters
Device Information(1)
Pulse Delay Circuits
xDSL Receiver
Pre-amps
PART NUMBER
LMH6654
PACKAGE
BODY SIZE (NOM)
4.90 mm x 3.91 mm
2.90 mm x 1.60 mm
4.90 mm x 3.91 mm
3.00 mm x 3.00 mm
SOIC (8)
LMH6654
SOT-23 (5)
SOIC (8)
LMH6655
LMH6655
VSSOP (8)
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Figure 1. Input Voltage and Curernt Noise vs.
Frequency (Vs= ±5V)
100
100
10
1
10
e
n
i
n
1
100k
FREQUENCY (Hz)
100
1k
10k
1M
10M
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.