ESD Rating (Note 2)
Human Body Model
Storage Temperature
Junction Temperature
2kV
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
-65°C to +150°C
+150°C
VIN to GND (Note 5)
SENSE, OUT, PGD to GND
GATE to GND (Note 5)
UVLO to GND
-0.3V to 100V
-0.3V to 100V
-0.3V to 100V
-0.3V to 100V
-0.3V to 7V
Operating Ratings
VIN Supply Voltage
+9.0V to 80V
PGD Off Voltage
0V to 80V
OVLO to GND
Junction Temp. Range
−40°C to +125°C
VIN to SENSE
-0.3V to +0.3V
Electrical Characteristics Limits in standard type are for TJ = 25°C only; limits in boldface type apply over the
junction temperature (TJ) range of -40°C to +125°C. Minimum and Maximum limits are guaranteed through test, design, or statistical
correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only.
Unless otherwise stated the following conditions apply: VIN = 48V.
Symbol
Input (VIN pin)
IIN-EN
Parameter
Conditions
Min.
Typ. Max. Units
Input Current, enabled
Input Current, disabled
UVLO > 2.5V and OVLO < 2.5V
UVLO <2.5V or OVLO >2.5V
1.3
480
7.6
1.6
650
8.0
mA
µA
V
IIN-DIS
PORIT
Power On Reset threshold at VIN to trigger VIN Increasing
insertion timer
POREN
Power On Reset threshold at VIN to
enable all functions
VIN increasing
8.4
90
9.0
V
POREN-HYS
OUT pin
POREN hysteresis
VIN decreasing
mV
IOUT-EN
OUT bias current, enabled
OUT = VIN, Normal operation
11
50
µA
IOUT-DIS
OUT bias current, disabled (Note 3)
Disabled, OUT = 0V, SENSE = VIN
UVLO, OVLO pins
UVLOTH
UVLO threshold
UVLO hysteresis current
UVLO delay
2.45
12
2.5
21
55
11
2.55
30
V
UVLOHYS
UVLO = 1V
µA
µs
UVLODEL
Delay to GATE high
Delay to GATE low
UVLO = 48V
UVLOBIAS
OVLOTH
UVLO bias current
OVLO threshold
1
µA
V
2.40
12
2.5
21
55
11
2.60
30
OVLOHYS
OVLODEL
OVLO hysteresis current
OVLO delay
OVLO = 2.6V
µA
µs
Delay to GATE high
Delay to GATE low
OVLO = 2.4V
OVLOBIAS
OVLO bias current
1
µA
Power Limit (PWR pin)
PWRLIM-1
PWRLIM-2
IPWR
Power limit sense voltage (VIN-SENSE)
19
25
25
20
31
mV
mV
µA
SENSE-OUT = 48V, RPWR = 150 kΩ
SENSE-OUT = 24V, RPWR = 75 kΩ
VPWR = 2.5V
PWR pin current
Gate Control (GATE pin)
IGATE
Source current
Sink current
Normal Operation, GATE-OUT = 5V
UVLO < 2.5V
10
1.75
45
16
2
22
2.6
175
µA
mA
mA
VIN - SENSE = 150 mV or VIN <
PORIT, VGATE = 5V
110
VGATE
Gate output voltage in normal operation GATE-OUT voltage
11.4
12
12.6
V
3
www.national.com