TI Confidential - NDA Restrictions
LM49151
SNAS482F –MARCH 2009–REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings(1)(2)(3)
Supply Voltage(1)
6.0V
−65°C to +150°C
−0.3 to VDD +0.3
Internally Limited
2.0kV
Storage Temperature
Input Voltage
Power Dissipation(4)
ESD Rating(5)
ESD Rating(6)
200V
Junction Temperature
Soldering Information
Thermal Resistance
150°C
See AN-1112 (SNVA009) “DSBGA Wafer Level Chip Scale Package”
θJA (typ) - YZR0020
46.1°C/W
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. All
voltages are measured with respect to the ground pin, unless otherwise specified
(2) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(4) The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the ambient temperature,
TA. The maximum allowable power dissipation is PDMAX = (TJMAX - TA) / θJA or the number given in Absolute Maximum Ratings,
whichever is lower.
(5) Human body model, applicable std. JESD22-A114C.
(6) Machine model, applicable std. JESD22-A115-A.
Operating Ratings
Temperature Range
−40°C ≤ TA ≤ +85°C
2.7V ≤ VDD ≤ 5.5V
1.7V ≤ I2CVDD ≤ 5.5V
I2CVDD ≤ VDD
Supply Voltage (VDD, LSVDD
)
Supply Voltage (I2CVDD
)
Electrical Characteristics 3.3V(1)(2)
The following specifications apply for LS and HP VOLUMEGAIN = 0dB, LSGAIN =12dB, HPGAIN = 0dB RL = 8Ω+30µH
(Loudspeaker), RL = 32Ω (Headphone), RL = 8Ω (Earpiece), CSET = 0.1µF, ALC disabled, f = 1kHz, unless otherwise
specified. Limits apply for TA = 25°C. (Note 7).
LM49151
Units
Symbol
Parameter
Conditions
Typical
Limits
(Limits)
(3)
(4)
VIN = 0, No Load
LS mode 1
3.7
4
5.5
6
mA (max)
mA (max)
mA (max)
mA (max)
mA (max)
mA
LS Mode 1, ALC enabled
HP Mode 8
4.9
0.8
7
7
IDD
Supply Current
EP Bypass Mode
1.3
10.5
LS+HP Mode 5 and 10
LS Mode 1, GAMP_SD = 1
HP Mode 8, GAMP_SD = 1
3
4.3
mA
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. All
voltages are measured with respect to the ground pin, unless otherwise specified
(2) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(3) Typical values represent most likely parametric norms at TA = +25ºC, and at the Recommended Operation Conditions at the time of
product characterization and are not ensured.
(4) Datasheet min/max specification limits are specified by test or statistical analysis.
4
Submit Documentation Feedback
Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: LM49151