5秒后页面跳转
LM309KSTEEL PDF预览

LM309KSTEEL

更新时间: 2024-02-15 03:06:37
品牌 Logo 应用领域
美国国家半导体 - NSC 线性稳压器IC调节器电源电路输出元件局域网
页数 文件大小 规格书
8页 256K
描述
5-Volt Regulator

LM309KSTEEL 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:, TO-204/-3Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.11可调性:FIXED
标称回动电压 1:2.1 V最大绝对输入电压:35 V
最大输入电压:25 V最小输入电压:7.1 V
JESD-30 代码:O-MBFM-P2JESD-609代码:e1
最大电网调整率:0.05%最大负载调整率:0.1%
湿度敏感等级:1功能数量:1
输出次数:1端子数量:2
工作温度TJ-Max:125 °C工作温度TJ-Min:
最高工作温度:125 °C最低工作温度:
最大输出电流 1:1 A最大输出电压 1:5.25 V
最小输出电压 1:4.75 V标称输出电压 1:5.05 V
封装主体材料:METAL封装等效代码:TO-204/-3
封装形状:ROUND封装形式:FLANGE MOUNT
峰值回流温度(摄氏度):260认证状态:Not Qualified
调节器类型:FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR子类别:Other Regulators
表面贴装:NO技术:BIPOLAR
端子面层:Tin/Silver/Copper (Sn/Ag/Cu)端子形式:PIN/PEG
端子位置:BOTTOM处于峰值回流温度下的最长时间:NOT SPECIFIED
最大电压容差:5%Base Number Matches:1

LM309KSTEEL 数据手册

 浏览型号LM309KSTEEL的Datasheet PDF文件第1页浏览型号LM309KSTEEL的Datasheet PDF文件第2页浏览型号LM309KSTEEL的Datasheet PDF文件第4页浏览型号LM309KSTEEL的Datasheet PDF文件第5页浏览型号LM309KSTEEL的Datasheet PDF文件第6页浏览型号LM309KSTEEL的Datasheet PDF文件第7页 
5. Preventing latchoff for loads connected to negative  
Application Hints  
1. Bypass the input of the LM109 to ground with 0.2 µF  
ceramic or solid tantalum capacitor if main filter capaci-  
tor is more than 4 inches away.  
voltage:  
If the output of the LM109 is pulled negative by a high cur-  
rent supply so that the output pin is more than 0.5V negative  
with respect to the ground pin, the LM109 can latch off. This  
can be prevented by clamping the ground pin to the output  
pin with a germanium or Schottky diode as shown. A silicon  
diode (1N4001) at the output is also needed to keep the  
positive output from being pulled too far negative. The 10Ω  
resistor will raise +VOUT by 0.05V.  
2. Avoid insertion of regulator into “live” socket if input  
voltage is greater than 10V. The output will rise to within  
2V of the unregulated input if the ground pin does not  
make contact, possibly damaging the load. The LM109  
may also be damaged if a large output capacitor is  
charged up, then discharged through the internal clamp  
zener when the ground pin makes contact.  
3. The output clamp zener is designed to absorb tran-  
sients only. It will not clamp the output effectively if a fail-  
ure occurs in the internal power transistor structure. Ze-  
ner dynamic impedance is  
4. Continuous RMS  
current into the zener should not exceed 0.5A.  
4. Paralleling of LM109s for higher output current is not  
recommended. Current sharing will be almost nonexist-  
ent, leading to a current limit mode operation for devices  
with the highest initial output voltage. The current limit  
devices may also heat up to the thermal shutdown point  
(175˚C). Long term reliability cannot be guaranteed  
under these conditions.  
DS007138-7  
Crowbar Overvoltage Protection  
Input Crowbar  
Output Crowbar  
DS007138-8  
DS007138-9  
*Zener is internal to LM109.  
*
*
Q1 must be able to withstand 7A continuous current if fusing is not used  
at regulator input. LM109 bond wires will fuse at currents above 7A.  
Q2 is selected for surge capability. Consideration must be given to filter  
capacitor size, transformer impedance, and fuse blowing time.  
††  
Trip point is 7.5V.  
Typical Performance Characteristics  
Maximum Average  
Power Dissipation (LM109K)  
Maximum Average  
Power Dissipation (LM309K)  
Output Impedance  
DS007138-18  
DS007138-16  
DS007138-17  
3
www.national.com  

与LM309KSTEEL相关器件

型号 品牌 描述 获取价格 数据表
LM309KSTEEL/NOPB NSC IC VREG 5.05 V FIXED POSITIVE REGULATOR, MBFM2, METAL CAN, TO-3, 2 PIN, Fixed Positive Sin

获取价格

LM310 NSC Voltage Follower

获取价格

LM310 INTERSIL N-CHANNEL JFET

获取价格

LM3100 NSC SIMPLE SWITCHER㈢ Synchronous 1MHz 1.5A Step-D

获取价格

LM3100 TI 同步 1MHz 1.5A 降压稳压器

获取价格

LM3100_07 NSC SIMPLE SWITCHER㈢ Synchronous 1MHz 1.5A Step-D

获取价格