LM20124, LM20124-Q1
www.ti.com
SNVS507F –OCTOBER 2007–REVISED MARCH 2013
4A, 1MHz PowerWise® Synchronous Buck Regulator
Check for Samples: LM20124, LM20124-Q1
1
FEATURES
DESCRIPTION
2
•
LM20124-Q1 is AEC-Q100 qualified and
The LM20124 is a full featured 1 MHz synchronous
buck regulator capable of delivering up to 4A of
continuous output current. The current mode control
loop can be compensated to be stable with virtually
any type of output capacitor. For most cases,
compensating the device only requires two external
components, providing maximum flexibility and ease
of use. The device is optimized to work over the input
voltage range of 2.95V to 5.5V making it suited for a
wide variety of low voltage systems.
manufactured on an Automotive Grade Flow
•
•
•
•
•
•
•
•
•
•
•
Input voltage range 2.95V to 5.5V
Accurate current limit minimizes inductor size
96% efficiency at 1 MHz switching frequency
32 mΩ integrated FET switches
Starts up into pre-biased loads
Output voltage tracking
Peak current mode control
The device features internal over voltage protection
(OVP) and over current protection (OCP) circuits for
increased system reliability. A precision enable pin
and integrated UVLO allows the turn-on of the device
to be tightly controlled and sequenced. Start-up
inrush currents are limited by both an internally fixed
and externally adjustable Soft-Start circuit. Fault
detection and supply sequencing is possible with the
integrated power good circuit.
Adjustable output voltage down to 0.8V
Adjustable Soft-Start with external capacitor
Precision enable pin with hysteresis
Integrated OVP, UVLO, power good and
thermal shutdown
•
TSSOP 16 pin exposed pad package
APPLICATIONS
The LM20124 is designed to work well in multi-rail
power supply architectures. The output voltage of the
device can be configured to track a higher voltage rail
using the SS/TRK pin. If the output of the LM20124 is
pre-biased at startup it will not sink current to pull the
output low until the internal soft-start ramp exceeds
the voltage at the feedback pin.
•
•
•
Simple to design, high efficiency point of load
regulation from a 5V or 3.3V bus
High Performance DSPs, FPGAs, ASICs and
microprocessors
Broadband, Networking and Optical
Communications Infrastructure
The LM20124 is offered in a 16-pin TSSOP package
with an exposed pad that can be soldered to the
PCB, eliminating the need for bulky heatsinks.
Typical Application Circuit
L
LM20124
V
OUT
SW
FB
V
IN
PVIN
R
R
FB1
EN
C
IN
R
F
C
OUT
FB2
AVIN
COMP
PGOOD
VCC
C
F
C
VCC
SS/TRK
AGND
R
C1
PGND
C
SS
(optional)
C
C1
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated