Linear Array with Intensity Adjustment
Datasheet
High-Power Lighting with Intensity Adjustment for use with Vision Systems
To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, see
www.bannerengineering.com.
•
•
Four high-intensity, visible wavelengths, plus IR and UV
The following array lengths are available:
290 mm (11.4 in)
435 mm (17.7 in)
580 mm (22.8 in)
870 mm (34.2 in)
1160 mm (45.6 in)
•
•
Dual intensity control: potentiometer and Analog wire
High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4
models) or via hookup
•
•
•
•
Optically isolated strobe signal
Active High or Active Low strobe models available
LEDs directly illuminate target
Lens angle of 6.5ꢀ on visible and IR models, lens angle of 5ꢀ on UV 395 nm models, reflector cup angle
of 15ꢀ on UV 365 nm models
•
•
•
•
Three window materials from which to choose: clear acrylic, clear glass, and clear diffusing acrylic
Maintenance-free, rugged construction
Built-in constant current regulation
Very even light pattern as close as 76.2 mm (3 in)
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com
toda la documentación técnica de los Linear Array with Intensity Adjustment, disponibles en múltiples idiomas, para detalles
del uso adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
Model Key
Light
Source
Linear
Array
Window
Material
Relative
Intensity
Intensity
Control
1
LED Color
Array Length
290
Housing
Strobe Polarity Connector
LED
R
LA
X
P
6 —
P
L
Q
R = Red
W = White
B = Blue
G = Green
I = IR
UV365 = UV365 nm
UV395 = UV395 nm
290 mm
435 mm
580 mm
870 mm
1160 mm
X = IP50
P=Clear
Plastic
G = Glass
D = Diffuse
Plastic
P = Pot &
analog wire
L = Low
H = High
Q = QD
The following caution applies to UV365 nm models:
CAUTION:
Risk Group 1: UV Emitted from this product.
Minimize exposure to eyes or skin. Use appropriate shielding and eye protection. Risk Group 1 (RG 1) products are safe for
most use applications, except for very prolonged exposures where direct ocular exposures may be expected.
- IEC 62471
The following caution applies to UV395 nm models:
CAUTION:
Risk Group 2: UV Emitted from this product.
Eye or skin irritation may result from exposure. Use appropriate shielding and eye protection. Risk Group 2 (RG 2) products
generally do not pose a realistic optical hazard if aversion responses limit the exposure duration or where lengthy exposures
are unrealistic.
- IEC 62471
1
UV365 is only available in models with a glass window.
Original Document
150944 Rev. H
14 November 2019
150944