5秒后页面跳转
LC78621E PDF预览

LC78621E

更新时间: 2024-09-21 22:37:07
品牌 Logo 应用领域
三洋 - SANYO /
页数 文件大小 规格书
34页 414K
描述
Compact Disc Player DSP

LC78621E 技术参数

生命周期:Obsolete零件包装代码:QFP
包装说明:QFP,针数:80
Reach Compliance Code:unknown风险等级:5.84
地址总线宽度:桶式移位器:NO
边界扫描:NO外部数据总线宽度:
格式:FIXED POINT内部总线架构:MULTIPLE
JESD-30 代码:R-PQFP-G80长度:20 mm
低功率模式:NO端子数量:80
最高工作温度:75 °C最低工作温度:-20 °C
封装主体材料:PLASTIC/EPOXY封装代码:QFP
封装形状:RECTANGULAR封装形式:FLATPACK
认证状态:Not Qualified座面最大高度:2.8 mm
最大供电电压:5.5 V最小供电电压:3.6 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:COMMERCIAL EXTENDED
端子形式:GULL WING端子节距:0.8 mm
端子位置:QUAD宽度:14 mm
uPs/uCs/外围集成电路类型:DIGITAL SIGNAL PROCESSOR, OTHERBase Number Matches:1

LC78621E 数据手册

 浏览型号LC78621E的Datasheet PDF文件第2页浏览型号LC78621E的Datasheet PDF文件第3页浏览型号LC78621E的Datasheet PDF文件第4页浏览型号LC78621E的Datasheet PDF文件第5页浏览型号LC78621E的Datasheet PDF文件第6页浏览型号LC78621E的Datasheet PDF文件第7页 
Ordering number : EN*5223  
CMOS LSI  
LC78621E  
Compact Disc Player DSP  
Preliminary  
Overview  
• Support for command input from a control  
microprocessor: commands include track jump, focus  
start, disk motor start/stop, muting on/off and track  
count (8 bit serial input)  
• Built-in digital output circuits.  
• Arbitrary track counting to support high-speed data  
access  
• Zero cross muting  
• Supports the implementation of a double-speed dubbing  
function.  
• D/A converter outputs with data continuity improved by  
8× oversampling digital filters. (These filters function as  
4× oversampling filters during double-speed playback.)  
• Built-in third-order ∑∆ D/A converters (PWM output)  
• Built-in digital attenuator (8 bits – alpha, 239 steps)  
• Built-in digital de-emphasis  
The LC78621E is a CMOS LSI that implements the signal  
processing and servo control required by compact disk  
players, laser disks, CD-V, CD-I and related products. The  
LC78621E provides several types of signal processing,  
including demodulation of the optical pickup EFM signal,  
de-interleaving, error detection and correction, and digital  
filters that can help reduce the cost of CD player units. It  
also processes a rich set of servo system commands sent  
from the control microprocessor. It also incorporates an  
EFM-PLL circuit and a one-bit D/A converter.  
Functions  
• Input signal processing: The LC78621E takes an HF  
signal as input, digitizes (slices) that signal at a precise  
level, converts that signal to an EFM signal, and  
generates a PLL clock with an average frequency of  
4.3218 MHz by comparing the phases of that signal and  
an internal VCO.  
• Built-in digital level and peak meter functions  
• Support for bilingual applications  
Features  
• Precise reference clock and necessary internal timing  
generation using an external 16.9344 MHz crystal  
oscillator  
• Disk motor speed control using a frame phase difference  
signal generated from the playback clock and the  
reference clock  
• Frame synchronization signal detection, protection and  
interpolation to assure stable data readout  
• EFM signal demodulation and conversion to 8-bit  
symbol data  
• 80-pin QIP (miniature, reduced space package)  
• Silicon gate CMOS process (for low power)  
• 5 V single-voltage power supply (for use in portable  
products)  
Package Dimensions  
unit: mm  
3174-QFP80E  
[LC78621E]  
• Subcode data separation from the EFM demodulated  
signal and output of that data to an external  
microprocessor  
• Subcode Q signal output to a microprocessor over the  
serial I/O interface after performing a CRC error check  
• Demodulated EFM signal buffering in internal RAM to  
handle up to ±4 frames of disk rotational jitter  
• Demodulated EFM signal reordering in the prescribed  
order for data unscrambling and de-interleaving  
• Error detection, correction, and flag processing (error  
correction scheme: dual C1 plus dual C2 correction)  
• The LC78620E sets the C2 flags based on the C1 flags  
and a C2 check, and then performs signal interpolation  
or muting depending on the C2 flags. The interpolation  
circuit uses a quadruple interpolation scheme. The  
output value converges to the muting level when four or  
more consecutive C2 flags occur.  
SANYO: QIP80E  
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters  
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN  
83095HA (OT) No. 5223-1/34  

与LC78621E相关器件

型号 品牌 获取价格 描述 数据表
LC78622E SANYO

获取价格

Compact Disc Player DSP
LC78622NE SANYO

获取价格

Compact Disc Player DSP
LC78624E SANYO

获取价格

Compact Disc Player DSP
LC78625 SANYO

获取价格

Compact Disc Player DSP
LC78625E SANYO

获取价格

Compact Disc Player DSP
LC78626 SANYO

获取价格

DSP for Compact Disk Players
LC78626E SANYO

获取价格

DSP for Compact Disk Players
LC78626KE SANYO

获取价格

CMOS LSI
LC78628 SANYO

获取价格

Compact Disc Player DSP with Built-in HDCD Decoder
LC78628E SANYO

获取价格

Compact Disc Player DSP with Built-in HDCD Decoder