ꢀꢀ
eLeCtRiCaL CHaRaCteRistiCs
NoRMaL stYLe
stYLe
KNP-25
KNP-50
KNP100
KNP200
2W
KNP300
KNP400 KNP500
KNP700
Power Rating at 40°C
Power Rating at 70°C
Voltage Proof
3W
4W
5W
7W
1/4W
250V
1/2W
300V
1W
400V
Resistance Range (±1%)
Resistance Range (±5%)
OperatingTemp. Range
Temperature Coefficient
0.22 Ω - 150 Ω 0.1 Ω - 800 Ω 0.1 Ω - 1.8K Ω
0.1 Ω - 2.8K Ω
0.1 Ω - 7.5K Ω
0.1 Ω - 6.5K Ω
0.03 Ω - 6.8K Ω
0.05 Ω - 200 Ω 0.03 Ω - 800 Ω 0.015 Ω - 2.2K Ω 0.015 Ω - 2.8K Ω 0.02 Ω - 7.5K Ω
-40°C to +200°C
±300ppm/°C
Note: Special value is available on request
MiNiatURe stYLe
stYLe
KNP50s
KNP1Ws
KNP2Ws
KNP3Ws
KNP5Ws
KNP7Ws
Power Rating at 40°C
Power Rating at 70°C
Voltage Proof
5W
7W
1/2W
1W
2W
3W
200V
300V
400V
Resistance Range (±1%)
Resistance Range (±5%)
OperatingTemp. Range
Temperature Coefficient
0.22 Ω - 150 Ω
0.05 Ω - 200 Ω
-40°C to +200°C
±300ppm/°C
0.1 Ω - 800 Ω
0.03 Ω - 800 Ω
0.1 Ω - 1.8K Ω
0.015 Ω - 2.2K Ω
0.1 Ω - 2.8K Ω
0.1 Ω - 7.5K Ω
0.02 Ω - 7.5K Ω
0.1 Ω - 6.5K Ω
0.03 Ω - 6.8K Ω
0.015 Ω - 2.8K Ω
Note: Special value is available on request
eNViRoNMeNtaL CHaRaCteRistiCs
PeRFoRMaNCe test
ShortTime Overload
Voltage Proof
test MetHod
IEC 60115-1 4.13
IEC 60115-1 4.7
IEC 60115-1 4.8
IEC 60115-1 4.6
IEC 60115-1 4.17
aPPRaise
10 times rated power for 5 Sec.
±2.0%+0.05 Ω
By type
inV-block for 60 Sec., test voltage by type
-55°C to +155°C
Temperature Coefficient
Insulation Resistance
Solderability
By type
inV-block for 60 Sec.
>100M Ω
235±5°C for 3±0.5 Sec
95% Min. coverage
No deterioration of
coatings and markings
Solvent Resistance of Marking
IEC 60115-1 4.30
IPA for 5±0.5 Min. with ultrasonic
Robustness ofTerminations
Damp Heat Steady State
Endurance at 70°C
IEC 60115-1 4.16
IEC 60115-1 4.24
IEC 60115-1 4.25
IEC 60115-1 4.19
IEC 60115-1 4.18
Direct load for 10 Sec. in the direction of the terminal leads
40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
≥2.5kg (24.5N)
±5.0%+0.05 Ω
±5.0%+0.05 Ω
±1.0%+0.05 Ω
±1.0%+0.05 Ω
Temperature Cycling
-55°C RoomTemp. +155°C RoomTemp. (5 cycles)
260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
Resistance to Soldering Heat
No evidence of flaming
Accidental OverloadTest
IEC 60115-1 4.26
4 times RCWV for 1 Min.
or arcing
Note: Rated Continuous WorkingVoltage (RCWV) = Power Rating x ResistanceValue