Datasheet > KCM55LR71H475KH01#

KCM55LR71H475KH01#

更新时间： 2023-09-03 20:26:50

品牌	Logo	应用领域
村田 - MURATA		医疗医疗器械
页数	文件大小	规格书
23页	1296K
描述
汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],植入式以外的医疗器械设备 [GHTF A/B/C]

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

KCM55LR71H475KH01# 数据手册

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第5页

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第6页

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第7页

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第9页

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第10页

浏览型号KCM55LR71H475KH01#的Datasheet PDF文件第11页

Reference only

Caution

Not Recommended

Left-right Misalignment

Recommended

Top-bottom Misalignment

Front-rear Misalignment

Top Blade

Bottom Blade

Not Recommended

Example of Recommended

V-groove Design

Left-right Misalignment

Low-Angle

Depth too Shallow

Depth too Deep

(3) Example of Router Type Separator

The router type separator performs cutting by a router rotating at a high speed. Since the board does not bend in the

cutting process, stress on the board can be suppressed during board separation. When attaching or removing

boards to/from the router type separator, carefully handle the boards to prevent bending.

[Outline Drawing]

Router

8. Assembly

1. Handling

If a board mounted with capacitors is held with one hand, the board may bend. Firmly hold the edges of the board with

both hands when handling. If a board mounted with capacitors is dropped, cracks may occur in the capacitors.

Do not use dropped boards, as there is a possibility that the quality of the capacitors may be impaired.

2. Attachment of Other Components

2-1. Mounting of Other Components

Pay attention to the following items, when mounting other

components on the back side of the board after capacitors

have been mounted on the opposite side. When the bottom

dead point of the suction nozzle is set too low, board deflection

stress may be applied to the capacitors on the back side

(bottom side), and cracks may occur in the capacitors.

Suction Nozzle

・ After the board is straightened, set the bottom dead point

of the nozzle on the upper surface of the board.

・ Periodically check and adjust the bottom dead point.

2-2. Inserting Components with Leads into Boards

When inserting components (transformers, IC, etc.) into boards,

bending the board may cause cracks in the capacitors or

cracks in the solder. Pay attention to the following.

・ Increase the size of the holes to insert the leads, to reduce

the stress on the board during insertion.

・ Fix the board with backup pins or a dedicated jig before

Component with Leads

insertion.

・ Support below the board so that the board does not bend.

When using multiple backup pins on the board, periodically

confirm that there is no difference in the height of each

backup pin.

7 / 22

EGKRC01

1...5 6 789 10 11...23

中文翻译

下载PDF

与KCM55LR71H475KH01#相关器件

型号	品牌	描述	获取价格	数据表
KCM55LR71H475KH01K	MURATA	Explanation of Symbols in This Catalog AEC-Q200 compliant product	获取价格
KCM55LR71J475KH01#	MURATA	汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],植入式以外的医疗器械设备	获取价格
KCM55LR71J475KH01K	MURATA	Chip Monolithic Ceramic Capacitors for Automotive	获取价格
KCM55LR72A475KH01#	MURATA	汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],植入式以外的医疗器械设备	获取价格
KCM55LR72A475KH01K	MURATA	Chip Monolithic Ceramic Capacitors for Automotive	获取价格
KCM55LR7YA106KH01#	MURATA	汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],植入式以外的医疗器械设备	获取价格