5秒后页面跳转
JTL3024T0315 PDF预览

JTL3024T0315

更新时间: 2024-10-02 12:05:51
品牌 Logo 应用领域
XPPOWER /
页数 文件大小 规格书
2页 291K
描述
30 Watts JTL Series

JTL3024T0315 数据手册

 浏览型号JTL3024T0315的Datasheet PDF文件第2页 
xppower.com  
30 Watts  
JTL Series  
4:1 Input Range  
High Power Density  
Single, Dual and Triple Outputs  
High Efficiency ꢀ Up to 91%  
Remote On/Off  
1600 VDC Isolation  
3 Year Warranty  
Specification  
Input  
General  
Input Voltage Range  
Input Current  
Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor  
Input Filter • Pi network  
• 24 V (9-36 VDC), 48 V (18-75 VDC)  
• See table  
Efficiency  
• See table  
Isolation Voltage  
• 1600 VDC Input to Output  
1600 VDC Input to Case  
1600 VDC Output to Case  
Undervoltage Lockout • 24 V models: ON 8.6 V, OFF 7.9 V typical  
Switching Frequency  
Power Density  
MTBF  
• 330 kHz typical  
• 37.5 W/in  
• 320 kHrs min to MIL-HDBK-217F  
at 25 °C, GB  
48 V models: ON 17.8 V, OFF 16 V typical  
3
Input Surge  
• 24 V models 50 VDC for 100 ms  
48 V models 100 VDC for 100 ms  
Output  
Output Voltage  
Environmental  
• See table  
Output Voltage Trim  
Minimum Load  
10% on single outputs models only  
Operating Temperature • -40 °C to +75 °C, see derating curve  
• No minimum load required for single and  
dual output models, 10% required on all  
outputs for triple output models  
Case Temperature  
Cooling  
• +105 °C max  
• Convection-cooled  
• 5-95% RH, non-condensing  
Operating Humidity  
Line Regulation  
Load Regulation  
0.2% max for single and dual output  
models, 1.0% main, 5% auxiliary for  
triple output models  
Storage Temperature • -40 °C to +125 °C  
• Single output models: 0.5% max  
Dual output models: 1% max  
balanced outputs  
EMC  
Triple output models: 1% max main, 5%  
auxiliaries  
5% for dual and triples output (see note 2)  
1% ( 5% for triple auxiliaries)  
Emissions  
• EN55022, class A conducted &  
radiated with external components,  
see application note  
Cross Regulation  
Setpoint Accuracy  
Start Up Time  
ESD Immunity  
Radiated Immunity  
EFT/Burst  
• EN61000-4-2, level 3, Perf Criteria A  
• EN61000-4-3 10 V/m Perf Criteria A*  
• EN61000-4-4 level 3, Perf Criteria A*  
• 30 ms typical  
Ripple & Noise  
• 100 mV or 1% pk-pk, whichever is greater  
single & dual output models, 50/75 mV  
pk-pk main/auxiliary outputs of triple output  
models, 20 MHz bandwidth (see note 3)  
Surge  
• EN61000-4-5 installation class 2,  
Perf Criteria A  
Transient Response  
Temp. Coefficient  
• 3% max deviation, recovery to within  
1% in <250 µs for a 25% load change  
• 0.02%/°C  
Conducted Immunity  
Magnetic Field  
• EN61000-4-6 10 V/rms, Perf Criteria A  
• EN61000-4-8 1 A/m, Perf Criteria A  
Overvoltage Protection • 3.3 V models: 3.9 V typical  
5 V models: 6.2 V typical  
*External input capacitor required 220 µF/250 V  
12 V models: 15 V typical  
15 V models: 18 V typical  
5 V models: 6.2 V typical  
12 V models: 15 V typical  
15 V models: 18 V typical  
Overload Protection  
• >150% of full load  
Short Circuit Protection • Trip & restart (hiccup mode), auto recovery  
Overtemperature  
Protection  
• 115 °C typical  
Remote On/Off  
• On = Logic High (>3.0) or Open  
Off = Logic Low (<1.2 V) or short pin 2 to 3  
Maximum Capacitive  
Load  
• See table  

与JTL3024T0315相关器件

型号 品牌 获取价格 描述 数据表
JTL3024T0512 XPPOWER

获取价格

30 Watts JTL Series
JTL3024T0515 XPPOWER

获取价格

30 Watts JTL Series
JTL3048D05 XPPOWER

获取价格

30 Watts JTL Series
JTL3048D12 XPPOWER

获取价格

30 Watts JTL Series
JTL3048D15 XPPOWER

获取价格

30 Watts JTL Series
JTL3048S05 XPPOWER

获取价格

30 Watts JTL Series
JTL3048S12 XPPOWER

获取价格

30 Watts JTL Series
JTL3048S15 XPPOWER

获取价格

30 Watts JTL Series
JTL3048S3V3 XPPOWER

获取价格

30 Watts JTL Series
JTL3048T0312 XPPOWER

获取价格

30 Watts JTL Series