ISO6740-Q1, ISO6741-Q1, ISO6742-Q1
ISO6740-Q1, ISO6741-Q1, ISO6742-Q1
www.ti.com
SLLSFG4C – DECEMBER 2019 – REVISED MARCH 2021
SLLSFG4C – DECEMBER 2019 – REVISED MARCH 2021
ISO674x-Q1 General-Purpose Reinforced Quad-Channel Automotive Digital Isolators
with Robust EMC
1 Features
3 Description
•
AEC-Q100 qualified with the following results:
– Device temperature Grade 1: –40°C to +125°C
ambient operating temperature range
Meets VDA320 isolation requirements
50 Mbps data rate
The ISO674x-Q1 devices are high-performance,
quad-channel digital isolators ideal for cost-sensitive
applications requiring up to 5000 VRMS isolation
ratings per UL 1577. These devices are also certified
by VDE, TUV, CSA, and CQC.
•
•
•
Robust isolation barrier:
The
ISO674x-Q1
devices
provide
high
electromagnetic immunity and low emissions at
low power consumption, while isolating CMOS or
LVCMOS digital I/Os. Each isolation channel has
a logic input and output buffer separated by TI's
double capacitive silicon dioxide (SiO2) insulation
barrier. These devices come with enable pins which
can be used to put the respective outputs in high
impedance for multi-master driving applications. The
ISO6740-Q1 device has all four channels in the
same direction, the ISO6741-Q1 device has three
forward and one reverse-direction channels, and the
ISO6742-Q1 device has two forward and two reverse-
direction channels. In the event of input power or
signal loss, the default output is high for devices
without suffix F and low for devices with suffix F. See
Device Functional Modes section for further details.
– High lifetime at 1060 VRMS working voltage
– Up to 5000 VRMS isolation rating
– Up to 10 kV surge capability
– ±75 kV/μs typical CMTI
Wide supply range: 1.71 V to 1.89 V and 2.25 V to
5.5 V
1.71 V to 5.5 V level translation
Default output high (ISO674x-Q1) and low
(ISO674xF-Q1) options
1.6 mA per channel typical at 1 Mbps
Low propagation delay: 11 ns typical
Robust electromagnetic compatibility (EMC)
– System-level ESD, EFT, and surge immunity
– ±8 kV IEC 61000-4-2 contact discharge
protection across isolation barrier
– Low emissions
•
•
•
•
•
•
Used in conjunction with isolated power supplies,
these devices help prevent noise currents on data
buses, such as CAN and LIN from damaging sensitive
circuitry. Through innovative chip design and layout
techniques, the electromagnetic compatibility of the
ISO674x-Q1 devices has been significantly enhanced
to ease system-level ESD, EFT, surge, and emissions
compliance. The ISO674x-Q1 family of devices is
available in a 16-pin SOIC wide-body (DW) package
and is a pin-to-pin upgrade to the older generations.
•
•
Wide-SOIC (DW-16) Package
Safety-Related Certifications (pending):
– DIN V VDE 0884-11:2017-01
– UL 1577 component recognition program
– IEC 60950-1, IEC 62368-1, IEC 61010-1,
IEC60601-1 and GB 4943.1-2011 certifications
2 Applications
•
Hybrid, electric and power train system (EV/HEV)
– Battery management system (BMS)
– On-board charger
– DC/DC converter
– Inverter and motor control
Device Information
PART NUMBER(1)
PACKAGE
BODY SIZE (NOM)
ISO6740-Q1, ISO6740F-Q1 SOIC (DW)
ISO6741-Q1, ISO6741F-Q1
10.30 mm × 7.50 mm
ISO6742-Q1, ISO6742F-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VCCO
VCCI
Series Isolation
Capacitors
INx
OUTx
ENx
GNDI
GNDO
Copyright © 2016, Texas Instruments Incorporated
VCCI=Input supply, VCCO=Output supply
GNDI=Input ground, GNDO=Output ground
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
Product Folder Links: ISO6740-Q1 ISO6741-Q1 ISO6742-Q1
1
without notice.