ISL97632
®
Data Sheet
February 22, 2008
FN9239.3
White LED Driver with Digital Dimming
Features
The ISL97632 represents an efficient and highly integrated
PWM boost LED driver that is suitable for 1.8” to 3.5” LCDs
that employ 2 to 6 white LEDs for backlighting. With
integrated Schottky diode, OVP, and dynamic digital
dimming capability, the ISL97632 provides a simple, reliable,
and flexible solution to the backlight designers.
• 5-Bit Digital Dimming Control
• Drives up to 6 LEDs in Series
• OVP (14V, 18V and 26V for 3, 4, and 6 LEDs applications)
• Integrated Schottky Diode
• 2.4V to 5.5V input
The ISL97632 features a simple single-wire digital interface
that provides a 5-bit dimming control. The dimming signal
adjusts the FB voltage and therefore the LED brightness in a
DC manner in 32 linear steps. An EN pin can be used to
provide a zero brightness setting or shutdown power saving
function.
• 86% Efficiency
• 1.4MHz Switching Frequency Allows Small LC
• Enable for Shutdown Function or Zero Brightness Setting
• 1µA Shutdown Current
• Internally Compensated
The ISL97632 is available in the 8 Ld TDFN (2mmx3mm)
package. There are 14V, 18V, and 26V OVP options that are
suitable for 3, 4, and 6 LEDs backlight applications
respectively. The ISL97632 is specified for operation over
the -40°C to +85°C ambient temperature at input voltage
from 2.4V to 5.5V.
• 8 Ld TDFN (2mmx3mm)
• Pb-Free (RoHS Compliant)
Applications
• LED backlighting for
- Cell phones
Pinout
ISL97632
(8 LD 2x3 TDFN)
TOP VIEW
- Smartphones
- MP3
- PMP
- Automotive Navigation Panel
- Portable GPS
GND
LX
1
2
3
4
8
7
6
5
VIN
EN
VOUT
FBSW
FB
Ordering Information
PACKAGE
SDIN
PART NUMBER
(Note)
PART
MARKING
TAPE AND REEL
(Pb-Free)
PKG.
DWG.#
ISL97632IRT14Z-T* ELB
ISL97632IRT14Z-TK* ELB
ISL97632IRT18Z-T* ELC
ISL97632IRT18Z-TK* ELC
ISL97632IRT26Z-T* ELD
ISL97632IRT26Z-TK* ELD
8 Ld 2x3 TDFN
8 Ld 2x3 TDFN
8 Ld 2x3 TDFN
8 Ld 2x3 TDFN
8 Ld 2x3 TDFN
8 Ld 2x3 TDFN
L8.2x3A
L8.2x3A
L8.2x3A
L8.2x3A
L8.2x3A
L8.2x3A
Typical Application Circuit
10µH or 22µH
VIN
LX
VIN
EN
VOUT
SDIN
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
FBSW
FB
GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006-2008. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
