Single Phase Core Controller for VR12.6
ISL95813
Features
The ISL95813 single-phase controller provides a fully compliant
VR12.6 power supply solution for Intel™ microprocessors. It
provides a tightly regulated output voltage that is programmed
through a high speed serial bus interface with the CPU. This
interface also allows the CPU to acquire real-time information from
the voltage regulator (VR), which includes load current and VR
temperature.
• Full VR12.6 specification compliance
• Wide input voltage range: 4.6V to 25V
• R3™ control architecture delivers excellent transient response
and power state mode transitions
• Current monitor (IMON) with temperature compensation
• VRHOT# indicator for CPU protection
Based on Intersil's Robust Ripple Regulator (R3™) technology, the
PWM modulator provides faster transient response and settling
time when compared against traditional modulation schemes. Its
variable frequency topology also allows for natural period stretching
discontinuous conduction mode (DCM) for increased efficiency and
power savings in light load situations.
• Digitally selectable switching frequency:
- 425kHz, 550kHz, 700kHz with ECO and PRO options
• Enhanced light-load efficiency discontinuous conduction mode
operation
• Ultra-small 20 lead 3mmx4mm QFN package
• Enable and power-good monitor
The ISL95813 has several other key features that include: DCR
current sensing with single NTC thermal compensation; discrete
resistor current sensing; differential remote voltage feedback; and
Applications
• Notebook Computers
user-programmable boot voltage, I
slew rate, and switching frequency.
, T
, voltage transition
MAX MAX
• Tablets, Ultrabooks™, and AIO
Related Literature
• AN1846 Designer’s Guide to the ISL95813 Evaluation Board
205kΩ
VIN
20
19
18
17
{4.6V TO 25V}
113kΩ
VR_ON
LG
1
2
3
4
5
6
16
15
14
13
12
11
BSC052N03LS
2200pF
LOUT
PGOOD
PHASE
VR12.6
CPU
0.15µH
COUT
14x22µF
VTT
499
IMON
UG
ISL95813
20 Ld 3x4 QFN
0.22µF
Ω
CERAMIC
BOOT
VRHOT#
BSC011N03LS
VCC
470kΩ (NTC)
27.4kΩ
3.83kΩ
NTC
E-PAD
(GND)
PGRM2
COMP
5.9kΩ
6800pF
124kΩ
1µF
7
8
9
10
3.65k
Ω
2.61kΩ
0.056µF
11kΩ
10kΩ (NTC)
Ω
549
82pF
1.82kΩ
FIGURE 1. TYPICAL 40Amax, 12.6, APPLICATION DIAGRAM
May 15, 2013
FN8449.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2013. All Rights Reserved
R3 Technologies and Intersil (and design) are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1