DATASHEET
2.048V Radiation Hardened Ultra Low Noise, Precision
Voltage Reference
ISL71091SEH20
Features
The ISL71091SEH20 is an ultra low noise, high DC accuracy
precision voltage reference with a wide input voltage range
from 4.2V to 30V. It uses Intersil’s Advanced Bipolar
technology to achieve 3.8µVP-P 0.1Hz to 10Hz noise with an
initial voltage accuracy of 0.05%.
• Reference output voltage . . . . . . . . . . . . . . . .2.048V ±0.05%
• Accuracy over temperature . . . . . . . . . . . . . . . . . . . . . ±0.15%
• Accuracy over radiation . . . . . . . . . . . . . . . . . . . . . . . . ±0.25%
• Output voltage noise . . . . . . . . . . . . 3.8µVP-P typ (0.1Hz to 10Hz)
• Supply current . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300µA (Typ)
• VOS temperature coefficient . . . . . . . . . . . . . . . 6ppm/°C Max
• Output current capability . . . . . . . . . . . . . . . . . . . 10mA/-5mA
• Line regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5ppm/V Max.
• Load regulation (Sourcing) . . . . . . . . . . . . . . 40ppm/mA Max.
• Operating temperature range. . . . . . . . . . . .-55°C to +125°C
The ISL71091SEH20 offers a 2.048V output voltage option
with 6ppm/°C temperature coefficient and also provides
excellent line and load regulation. The device is offered in an
8 Ld Flatpack package.
The ISL71091SEH20 is ideal for high-end instrumentation,
data acquisition and processing applications requiring high DC
precision where low noise performance is critical.
• Radiation environment
Applications
• Precision voltage sources for data acquisition system for
space application
- High dose rate (50 to 300rad(Si)/s). . . . . . . . . 100krad(Si)
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . .100krad(Si)*
- SEL/SEB free (Vcc = 36V) . . . . . . . . . . . . 86MeV•cm2/mg
• Strain and pressure gauge for space applications
• Radiation hardened PWM requiring precision outputs
*Product capability established by initial characterization. The
“EH” version is acceptance tested on a wafer-by-wafer basis to
50krad(Si) at low dose rate.
• Electrically screened to SMD 5962-14208
Related Literature
• AN1906, “ISL71091SEHXXEV1Z User’s Guide”
• AN1938, “SEE Testing of the ISL71091SEH”
• AN1939, “Radiation Report of the ISL71091SEH”
ISL71091SEH20
2.051
2.050
1
2
8
7
DNC
VIN
DNC
DNC
VIN
VREF
0.1µF
3
4
6
5
COMP
GND
VOUT
TRIM
2.049
2.048
2.047
2.046
2.045
UNIT 1
1nF
1µF
UNIT 2
C
UNIT 3
REFIN DACOUT
UNIT 4
UNIT 5
D12
VDD
VEE
VDD
VEE
1.1k
D0
BIPOFF
GND
NOTE: Select C to minimize
settling time.
-65 -45 -25 -5
15
35
55
75
95
115 135
HS-565BRH
TEMPERATURE (°C)
FIGURE 2. VOUT vs TEMPERATURE
FIGURE 1. ISL71091SEH20 TYPICAL APPLICATION DIAGRAM
July 11, 2014
FN8632.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1