ISL22346
®
Quad Digitally Controlled Potentiometers (XDCP™)
Data Sheet
July 28, 2006
FN6177.0
2
Low Noise, Low Power I C® Bus, 128 Taps
Features
The ISL22346 integrates four digitally controlled
potentiometers (DCP) and non-volatile memory on a
monolithic CMOS integrated circuit.
• Four potentiometers in one package
• 128 resistor taps
2
• I C serial interface
The digitally controlled potentiometers are implemented with
a combination of resistor elements and CMOS switches. The
position of the wipers are controlled by the user through the
- Three address pins, up to eight devices/bus
• Non-volatile storage of wiper position
• Wiper resistance: 70Ω typical @ 3.3V
• Shutdown mode
2
I C bus interface. Each potentiometer has an associated
volatile Wiper Register (WR) and a non-volatile Initial Value
Register (IVR) that can be directly written to and read by the
user. The contents of the WR controls the position of the
wiper. At power-up the device recalls the contents of the two
DCP’s IVR to the corresponding WRs.
• Shutdown current 5µA max
• Power supply: 2.7V to 5.5V
• 50kΩ or 10kΩ total resistance
The DCPs can be used as a three-terminal potentiometers
or as a two-terminal variable resistors in a wide variety of
applications including control, parameter adjustments, and
signal processing.
• High reliability
- Endurance: 1,000,000 data changes per bit per register
- Register data retention: 50 years @ T <55°C
• 20 Ld TSSOP
Pinout
• Pb-free plus anneal product (RoHS compliant)
ISL22346
(20 LD TSSOP)
TOP VIEW
RH3
RL3
RW3
A2
1
20
19
18
17
16
15
14
13
12
11
RW0
RL0
RH0
SHDN
VCC
A1
2
3
4
SCL
SDA
GND
RW2
RL2
RH2
5
6
7
A0
8
RH1
RL1
RW1
9
10
Ordering Information
RESISTANCE OPTION
TEMP. RANGE
PART NUMBER
PART MARKING
(kΩ)
(°C)
PACKAGE
20 Ld TSSOP
PKG. DWG. #
ISL22346UFV20Z
(Notes 1, 2)
22346 UFVZ
50
-40 to +125
M20.173
(Pb-Free)
ISL22346WFV20Z
(Notes 1, 2)
22346 WFVZ
10
-40 to +125
20 Ld TSSOP
(Pb-Free)
M20.173
NOTES:
1. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Add “-TK” suffix for 1,000 Tape and Reel option
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) and XDCP are registered trademarks of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.