ISL22416
®
Single Digitally Controlled Potentiometer (XDCP™)
Data Sheet
®
June 23, 2006
FN6227.0
Low Noise, Low Power, SPI Bus, 128 Taps
Features
The ISL22416 integrates a single digitally controlled
potentiometer (DCP) and non-volatile memory on a
monolithic CMOS integrated circuit.
• 128 resistor taps
• SPI serial interface
• Non-volatile storage of wiper position
• Wiper resistance: 70Ω typical @ 3.3V
• Shutdown mode
The digitally controlled potentiometer is implemented with a
combination of resistor elements and CMOS switches. The
position of the wiper is controlled by the user through the SPI
serial interface. The potentiometer has an associated
volatile Wiper Register (WR) and a non-volatile Initial Value
Register (IVR) that can be directly written to and read by the
user. The contents of the WR controls the position of the
wiper. At power-up the device recalls the contents of the
DCP’s IVR to the WR.
• Shutdown current 5µA max
• Power supply: 2.7V to 5.5V
• 50kΩ or 10kΩ total resistance
• High reliability
- Endurance: 1,000,000 data changes per bit per register
The DCP can be used as three-terminal potentiometer or as
two-terminal variable resistor in a wide variety of applications
including control, parameter adjustments, and signal
processing.
- Register data retention: 50 years @ T ≤ 55 °C
• 10 Lead MSOP
• Pb-free plus anneal product (RoHS compliant)
Pinout
ISL22416
(10 LD MSOP)
TOP VIEW
10
9
SCK
SDO
SDI
VCC
1
2
3
4
5
RH
RW
8
7
CS
RL
SHDN
GND
6
Ordering Information
RESISTANCE OPTION
TEMP. RANGE
PART NUMBER
PART MARKING
416UZ
(kΩ)
(°C)
PACKAGE
10 Ld MSOP
PKG. DWG. #
ISL22416UFU10Z
(Notes 1, 2)
50
10
-40 to +125
M10.118
(Pb-Free)
ISL22416WFU10Z
(Notes 1, 2)
416WZ
-40 to +125
10 Ld MSOP
(Pb-Free)
M10.118
NOTES:
1. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Add “-TK” suffix for 1,000 Tape and Reel option
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) and XDCP are registered trademarks of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.