IS61WV102416ALL
IS61WV102416BLL
IS64WV102416BLL
1M x 16 HIGH-SPEED ASYNCHRONOUS
CMOS STATIC RAM WITH 3.3V SUPPLY
JUNE 2014
FEATURES
•ꢀ High-speedꢀaccessꢀtimes:ꢀ
8, 10, 20 ns
•ꢀ High-performance,ꢀlow-powerꢀCMOSꢀprocess
•ꢀ Multipleꢀcenterꢀpowerꢀandꢀgroundꢀpinsꢀforꢀgreaterꢀ
noise immunity
•ꢀ EasyꢀmemoryꢀexpansionꢀwithꢀCE and OE op-
tions
DESCRIPTION
TheꢀISSIꢀIS61WV102416ALL/BLLꢀandꢀIS64WV102416BLLꢀ
areꢀhigh-speed,ꢀ16M-bitꢀstaticꢀRAMsꢀorganizedꢀasꢀ1024Kꢀ
words by 16 bits. It is fabricated using ISSI's high-perfor-
manceꢀ CMOSꢀ technology.ꢀ Thisꢀ highlyꢀ reliableꢀ processꢀ
coupled with innovative circuit design techniques, yields
high-performance and low power consumption devices.
When CEꢀisꢀHIGHꢀ(deselected),ꢀtheꢀdeviceꢀassumesꢀaꢀ
standby mode at which the power dissipation can be re-
ducedꢀdownꢀwithꢀCMOSꢀinputꢀlevels.
•ꢀ CE power-down
•ꢀ Fullyꢀstaticꢀoperation:ꢀnoꢀclockꢀorꢀrefreshꢀ
required
•ꢀ TTLꢀcompatibleꢀinputsꢀandꢀoutputs
•ꢀ Singleꢀpowerꢀsupply
EasyꢀmemoryꢀexpansionꢀisꢀprovidedꢀbyꢀusingꢀChipꢀEnableꢀ
andꢀOutputꢀEnableꢀinputs,ꢀCE and OE.ꢀTheꢀactiveꢀLOWꢀ
WriteꢀEnableꢀ(WE) controls both writing and reading of the
memory. A data byte allows Upper Byte (UB)ꢀandꢀLowerꢀ
Byte (LB) access.
Vddꢀ1.65Vꢀtoꢀ2.2Vꢀ(IS61WV102416ALL)
speed = 20ns for Vdd 1.65V to 2.2V
Vddꢀ2.4Vꢀtoꢀ3.6Vꢀ(IS61/64WV102416BLL)
speed = 10ns for Vdd 2.4V to 3.6V
speed = 8ns for Vdd 3.3V + 5%
•ꢀ Packagesꢀavailable:
TheꢀdeviceꢀisꢀpackagedꢀinꢀtheꢀJEDECꢀstandardꢀ48-pinꢀ
TSOPꢀTypeꢀIꢀandꢀ48-pinꢀMiniꢀBGAꢀ(9mmꢀxꢀ11mm).
–
48-ball miniBGA (9mm x 11mm)
ꢀ –ꢀꢀꢀ48-pinꢀTSOPꢀ(TypeꢀI)ꢀ
•ꢀ IndustrialꢀandꢀAutomotiveꢀTemperatureꢀSupport
•ꢀ Lead-freeꢀavailable
•ꢀ Dataꢀcontrolꢀforꢀupperꢀandꢀlowerꢀbytes
FUNCTIONAL BLOCK DIAGRAM
1024K x 16
MEMORY ARRAY
A0-A19
DECODER
VDD
GND
I/O0-I/O7
Lower Byte
I/O
DATA
COLUMN I/O
CIRCUIT
I/O8-I/O15
Upper Byte
CE
OE
WE
CONTROL
CIRCUIT
UB
LB
Copyright © 2014 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without
notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest
version of this device specification before relying on any published information and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reason-
ably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications
unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
1
Rev. G
06/02/2014