Datasheet > IR12-206C/L268/TR8

IR12-206C/L268/TR8

更新时间： 2024-02-29 15:24:00

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

IR12-206C/L268/TR8 技术参数

IR12-206C/L268/TR8

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 7 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

1...4 5 678 9

下载PDF

型号	品牌	描述	获取价格	数据表
IR12-21C/TR8	EVERLIGHT	Infrared LED, 2mm, 1-Element, 940nm, ROHS COMPLIANT, PLASTIC, SMD, 2 PIN	获取价格
IR12-21C-TR8	EVERLIGHT	Chip Infrared LED With Right Angle Lens	获取价格
IR1254-R8	EVERLIGHT	OPTO INTERRUPTER ITR	获取价格
IR130CSP	INFINEON	Flipky	获取价格
IR130CSPTR	VISHAY	Rectifier Diode, Schottky, 2 Element, 1A, 30V V(RRM), Silicon, SURFACE MOUNT PACKAGE-4	获取价格
IR130CSPTR	INFINEON	Rectifier Diode, Schottky, 1 Element, 1A, 30V V(RRM), Silicon, FLIPKY, 4 PIN	获取价格