ICL7135
®
Data Sheet
October 25, 2004
FN3093.3
1
4 / Digit, BCD Output, A/D Converter
2
Features
The Intersil ICL7135 precision A/D converter, with its
multiplexed BCD output and digit drivers, combines dual-
slope conversion reliability with ±1 in 20,000 count accuracy
and is ideally suited for the visual display DVM/DPM market.
The 2.0000V full scale capability, auto-zero, and auto-
polarity are combined with true ratiometric operation, almost
ideal differential linearity and true differential input. All
necessary active devices are contained on a single CMOS
lC, with the exception of display drivers, reference, and a
clock.
• Accuracy Guaranteed to ±1 Count Over Entire ±20000
Counts (2.0000V Full Scale)
• Guaranteed Zero Reading for 0V Input
• 1pA Typical Input Leakage Current
• True Differential Input
• True Polarity at Zero Count for Precise Null Detection
• Single Reference Voltage Required
• Overrange and Underrange Signals Available for Auto-
Range Capability
The ICL7135 brings together an unprecedented combination
of high accuracy, versatility, and true economy. It features
• All Outputs TTL Compatible
o
auto-zero to less than 10µV, zero drift of less than 1µV/ C,
• Blinking Outputs Gives Visual Indication of Overrange
input bias current of 10pA (Max), and rollover error of less
than one count. The versatility of multiplexed BCD outputs is
increased by the addition of several pins which allow it to
operate in more sophisticated systems. These include
STROBE, OVERRANGE, UNDERRANGE, RUN/HOLD and
BUSY lines, making it possible to interface the circuit to a
microprocessor or UART.
• Six Auxiliary Inputs/Outputs are Available for Interfacing to
UARTs, Microprocessors, or Other Circuitry
• Multiplexed BCD Outputs
• Pb-Free Available (RoHS Compliant)
Pinout
Ordering Information
ICL7135
(PDIP)
TEMP.
PKG.
TOP VIEW
PART NUMBER
RANGE (°C)
PACKAGE
28 Ld PDIP
DWG. #
ICL7135CPI
0 to 70
0 to 70
E28.6
E28.6
V-
REFERENCE
NALOG COMMON
INT OUT
1
2
3
4
5
6
7
8
9
28 UNDERRANGE
27 OVERRANGE
26 STROBE
25 R/H
ICL7135CPIZ
(Note 1)
28 Ld PDIP
(Pb-free) (Note 2)
NOTES:
1. Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020C.
AZ IN
24 DIGITAL GND
23 POL
BUFF OUT
REF CAP -
REF CAP +
IN LO
22 CLOCK IN
21 BUSY
20
(LSD) D1
IN HI 10
V+ 11
19 D2
2. Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
18 D3
(MSD) D5
12
17 D4
(LSB) B1 13
B2 14
16 (MSB) B8
15 B4
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
5秒后页面跳转
74HC165引脚说明、驱动程序示例解读
深入解析AD9833：DDS频率合成器的卓越性能与广泛应用
高性能TDA7293音频功率放大器技术特性与应用分析
STM32H743技术深度剖析与应用案例探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
