DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
Contact Extraction
B
■ Contact extraction tool : Flat-bladed screwdriver. 1.2mm blade width or DF-C-PO(B)
■ Intended crimp Contacts : DF63-1618SC(F), DF63-2022SC(F), DF63-1618PC(F), DF63-2022PC(F)
■ Work Method
Housing Cross Sectional Diagram
1.Refer to the drawing No.1. Insert
Contact extraction tool
correct size contact extraction tool in
the insulator against the molded-in
lance. Deflect the lance as shown.
2
2.Assure that the lance is deflected to
release the contact and pull-out wire
with the terminated contact.
1
ꢀꢀCaution There are parts on the crimp contact that can cause injuries, please use caution when unmating the contacts.
Mated dimensions
B
●Board-to-Wire Connection using
●Socket to Right Angle Header Connection
(20)
the straight pin header
DF63-*S-3.96C
8.91
DF63-*S-3.96C
DF63-*P-3.96DSA
DF63-*P-3.96DS
●Socket to In-line Plug Connection
(29.55)
(11.1)
DF63-*S-3.96C
DF63-*EP-3.96C
Precautions for use
B
1. The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then depress
the lock and un-mate.
2. When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position.
Route cables in such a way that they do twist when being installed.
3. Make sure to turn off the power when mating or un-mating the connector.
4. Please do not touch any area around the contact part with your hand when the power is on; it could be very dangerous.
5. Please contact Hirose representative about the assembly procedure and the instruction manual.
Rated values
B
B
Please avoid using the connectors above the ratings. Also, do not insert or pull out energized or “ live” wires.
Operating environment
Please contact us if you are designing this connector into environmental conditions where high and low temperatures are repeated.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2015. Contents are subject to change without notice for the purpose of improvements.
8